Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
60 mm ball-bearing case fan runs on 12 V at 0.27 A with a two-pin connector
The Zyvpee PSAD16025BM is a 60 by 25 millimetre DC case fan designed for tight chassis spaces or targeted component cooling. It runs on 12 volts and draws 0.27 amps through a simple two-pin connector. The black frame and non-LED blades keep the appearance neutral for any build.
A standard two-pin header supplies power without PWM control, so speed stays constant unless the motherboard or controller varies voltage. Ball bearings resist dust ingress better than sleeve types and maintain consistent rotation over long service intervals. The square 60 millimetre frame fits industry-standard mounting holes for quick installation.
At 0.27 amps the fan adds minimal load to a 12 volt rail, making it suitable for secondary cooling zones or legacy systems with limited headroom. Ball-bearing operation produces a predictable acoustic signature that does not degrade into rattle as quickly as sleeve alternatives. The compact dimensions allow placement near voltage regulators or drive cages where larger fans cannot reach.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product line | PSAD16025BM |
| Model name | PSAD16025BM |
| Product type | Case Fan |
| Product color | Black |
| Power | |
| Power input connector | 2 Pin |
| Size & build | |
| Bearing design | Ball |
| Product dimensions | 60 × 60 × 25 mm |
| Compatibility | |
| Compatible with | Case |
| More details | |
| LED lighting | Non-LED |
The 2-pin connector supplies 12 V at 0.27 A but provides no PWM or speed-signal wire, so the fan runs at full speed unless the motherboard or controller varies the voltage.
The fan measures 60 mm square and 25 mm thick, matching standard 60 mm mounting holes; verify your case has the same hole spacing and clearance.
Align the four screw holes, insert screws through the case into the fan frame, then plug the 2-pin header onto the motherboard fan connector; the frequent error is reversing the plug polarity, which prevents the fan from spinning.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?