Lian Li UNI Fan TL LCD Wireless 140mm Reverse Blade case fan 14RTLLCD1W1B
- 140 mm
- Fluid Dynamic
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 70 mm by 38 mm case fan with a 12 V .8 A four-pin connector and dual-ball bearing
The Zyvpee RB7038BU is a 70 by 38 millimetre case fan built around a dual-ball bearing motor. It draws .8 amps at 12 volts through a standard four-pin connector. The black, non-LED frame suits builders who need a compact airflow booster for tight chassis spaces.
Dual-ball bearings keep friction low during continuous operation at 12 volts. The four-wire interface allows the motherboard to modulate speed, reducing noise when full flow is not required. Power draw stays at .8 amps, so the fan adds minimal load to the 12 volt rail.
The 70 by 38 millimetre footprint fits narrow mounting points where larger fans cannot sit. Four-pin PWM control works with any modern fan header, leaving three-pin headers free for simpler devices. Buyers who need higher static pressure or larger frame dimensions should look elsewhere.
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | 3ccooler.com |
| Product line | RB7038BU |
| Model name | RB7038BU |
| Product type | CPU Cooler Fan |
| Product color | Black |
| Power | |
| Power input connector | 4 Pin |
| Size & build | |
| Bearing design | 2 Ball |
| Product dimensions | 70 × 38 mm |
| More details | |
| LED lighting | Non-LED |
Mount the fan using the four 70mm screw holes, connect the 4-pin PWM header to the motherboard, and ensure the arrow on the frame matches the intended airflow direction — the arrow is the step most builders overlook.
The dual ball bearings are sealed and rated for continuous operation; no lubrication is required, but dust should be cleared from the blades and frame every few months with compressed air to maintain airflow.
The motor draws a steady 0.8A at 12V, so the first constraint is the motherboard header's current rating — if the header is limited below 0.8A the fan will throttle or shut down before thermal limits are reached.
More in PC Cooling Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?