Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16GB DDR3L 1600 ECC registered DIMM with 2Rx4 organisation and 1.35V operation
This 16GB registered DDR3L module runs at 1600MHz with CL11 latency and 1.35V operation. It targets administrators upgrading Kingston D2G72K111, KTL-TS316/16G or KVR16LR11D4K4/64 compatible systems. The 2Rx4 organisation uses major-brand chips tested for server workloads.
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC circuitry corrects single-bit errors and detects multi-bit errors without halting the system. The 1.35V low-voltage design limits heat output when all ranks are active for extended periods.
The 240-pin DIMM form factor fits only DDR3 or DDR3L slots keyed for 1.35V or 1.5V operation. Maximum throughput is defined by the PC3L-12800 rating at 1600MHz. Systems requiring higher bandwidth or different keying cannot use this module.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 16 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.35 V |
The module operates at 1.35V, which is the low-voltage DDR3L standard, reducing power draw and heat compared to standard 1.5V DDR3 during continuous operation.
You need a server or workstation motherboard with DDR3 240-pin DIMM slots and a CPU memory controller that supports registered ECC DDR3L at 1600MHz.
Mixing different CAS latencies is possible; the system will typically run all modules at the slowest speed and highest latency present, but stability depends on the platform.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?