Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR3 registered ECC module running at 1333 MHz with CL9 latency and 1.5 V for server workloads
This 8GB registered DIMM uses DDR3 1333 memory with ECC error correction for server and workstation systems. It runs at the standard 1.5V voltage and presents a 2Rx8 rank configuration on a 240-pin interface. The module is built with major brand chips and tested for reliable operation in compatible platforms.
The stick is a direct equivalent for the Kingston KVR13E9/8HM part number, matching its DDR3 1333 speed, ECC RDIMM type and 1.5V rating. The upgrade is worth it when a system requires registered memory with error correction and the board has free 240-pin slots that support DDR3 1333 PC3-10600 modules.
Installation requires a motherboard that accepts DDR3 ECC RDIMM modules at 1333 MT/s and supplies 1.5V to the 240-pin sockets. The single 8GB module leaves additional slots open for further capacity expansion while the registered buffer reduces electrical load on the memory controller.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.5 V |
Yes, the module is a 240-pin DDR3 RDIMM designed for server and workstation systems that accept registered ECC memory.
Align the notch with the slot key, press firmly until both side clips click, and verify in BIOS that the memory runs at 1333 MHz with ECC active.
DDR3 registered ECC modules typically run for many years; replace if memory diagnostics report correctable errors increasing over time or after a major platform upgrade.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?