Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3 1333MHz ECC registered DIMM with 2Rx4 organisation for IBM-Lenovo servers
This 8 GB DDR3 registered DIMM runs at 1333 MHz (PC3-10600) with CL9 latency and 1.50 V operation. It uses a 2Rx4 organisation and major-brand chips to provide ECC error correction for compatible servers and workstations. The 240-pin module replaces IBM-Lenovo part numbers 0A89412, 43X5056 and 46C7449.
The registered buffer reduces electrical load on the memory controller, helping maintain signal integrity during continuous workloads. ECC circuitry detects and corrects single-bit errors on the fly, preventing data corruption over long runs. Major-brand chips are tested to meet server-grade reliability standards for 24/7 operation.
Standard 1.50 V DDR3 voltage keeps power consumption within typical registered DIMM limits for this speed class. Passive cooling relies on chassis airflow; no moving parts are present on the module itself. The registered design adds minimal latency overhead while contributing to stable operation in densely populated memory slots.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.5 V |
At the standard 1.50V DDR3 voltage this 8GB registered DIMM draws typical DDR3 power and produces normal operating heat for a 1333MHz module; registered buffering adds slight load on the memory controller but no extra voltage is required.
You need a server or workstation board with DDR3 240-pin DIMM slots that accept registered ECC memory and support PC3-10600 speed; the system BIOS must also enable ECC and registered operation.
No, registered and unbuffered ECC DIMMs cannot be mixed; the memory controller must be configured for registered operation, so all slots must use registered modules like this one.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?