Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR3L 1066 ECC registered DIMM with 4Rx8 organisation and 1.35 V operation
This 8 GB DDR3L 1066 ECC registered DIMM is built for server and workstation platforms that require error-correcting memory. The module runs at PC3L-8500 speed with a CAS latency of CL7 and operates at the low 1.35 V DDR3L voltage. It targets administrators upgrading or repairing compatible IBM-Lenovo systems.
The stick uses a standard 240-pin DIMM form factor and a 4Rx8 rank layout with major-brand chips. Registered buffering reduces electrical load on the memory controller, allowing larger memory populations in multi-socket boards. The pin-out matches the DDR3L keying so it only fits slots wired for 1.35 V operation.
At 1.35 V the module draws less power and generates less heat than standard 1.5 V DDR3, helping chassis airflow in dense rack enclosures. ECC circuitry adds minimal overhead while correcting single-bit errors in real time. The registered design keeps signal integrity stable under sustained workloads without increasing acoustic noise.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1066 (PC3L 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 4Rx8 |
| Power | |
| Rated voltage | 1.35 V |
It runs at DDR3L 1066 (PC3L-8500) with CL7 latency and 1.35V operation.
A DDR3 DIMM slot with 240 pins; the registered design requires a server or workstation motherboard that supports RDIMMs.
Power down, open the chassis, align the notch on the 240-pin edge connector, press firmly until both clips lock, then verify in BIOS that ECC and registered modes are enabled.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?