Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR3L 1333 MHz ECC registered DIMM with 1.35 V low-voltage operation for server and workstation upgrades
This 8GB module runs at DDR3L 1333 (PC3L-10600) with CL9 latency and 1.35V operation. It uses a registered design with ECC and a single 1Rx4 rank on a 240-pin form factor. The stick is built with major-brand chips and serves as a direct replacement for the Kingston KTM-SX313LLVS/8G part.
Suits administrators expanding memory in systems that require registered ECC DDR3L DIMMs at 1333 MHz. Not for desktop boards that accept only unbuffered non-ECC memory or platforms limited to higher-voltage DDR3 modules.
The low-voltage 1.35V specification is the decisive parameter; systems qualified for 1.5V DDR3 may not support this module, so verify the platform's memory-voltage requirement before ordering.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1333 (PC3L 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Power | |
| Rated voltage | 1.35 V |
The DDR3L 1333 MHz RDIMM operates at 1.35 V, lowering power draw and heat output compared with standard 1.5 V DDR3 during all-day workloads.
A DDR3 DIMM socket (240-pin) with registered ECC support and a chipset that accepts 1Rx4 modules is needed for the module to function.
Mixing 1.35 V DDR3L with 1.5 V DDR3 is not recommended; the system will default to the higher voltage, negating the low-voltage benefit and risking instability.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?