Kingston Technology Corp. KSM56R46BD8PMI-48MBI 48GB DDR5-5600 CL46 2Rx8 Registered server RAM
- 48 GB
- DDR5 5600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 8 GB DDR3L 1600 MHz ECC registered DIMM with 1.35 V operation and CL11 latency for server upgrades
This 8 GB DDR3L registered DIMM adds error-correcting memory to compatible servers and workstations. It runs at 1600 MHz with CL11 latency and a 2Rx4 organisation using major-brand chips. The module fits 240-pin DIMM slots and replaces Micron part numbers MT36KSF1G72PZ-1G6 and MT36KSF1G72PZ-1G6K1.
Operating at 1.35 V, the DDR3L design reduces power draw and heat output compared with standard-voltage DDR3. Lower thermal load helps keep fan speeds down in densely populated memory channels. Registered buffering also eases electrical loading on the memory controller during sustained workloads.
The 8 GB density suits administrators moving up from 4 GB sticks when the platform supports registered ECC memory. Verify the system’s qualified-vendor list and maximum supported capacity per slot before ordering. The jump is worthwhile when virtualization, database caching or multi-user workloads exceed the current memory ceiling.
Measured against everything we stock in ECC Server RAM, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | A-Tech |
| Total capacity | 8 GB |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Power | |
| Rated voltage | 1.35 V |
Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both latches click, then verify in BIOS that the 1.35V voltage and registered ECC mode are detected.
No routine maintenance is required; if a memory error appears, run a diagnostic and replace the individual 8GB RDIMM, as the module is not serviceable and uses major-brand chips tested for long-term reliability.
The registered buffer and ECC overhead set the practical throughput ceiling; sustained workloads will hit the DDR3L 1600MHz bandwidth limit before temperature or voltage throttling becomes a factor.
More in ECC Server RAM
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?