ABLEGRID 6ft 2-Pin Figure 8 Power Cord for Canon PIXMA iP2600
A 6 ft two-pin figure-8 power cord supplying AC 100-240 V to compatible Canon PIXMA iP2600 printers
- Cable length6 ft (1.83 m)
- Product typePower Cable
- Product colorBlack
- Overall length6 ft (1.83 m)
- 6 ft cable reaches distant outlets easily
- 2-pin figure-8 connector fits Canon PIXMA iP2600
- UL listed for verified electrical safety
- 100-240 V input works worldwide without adapter
- Over-voltage and over-heat protection guards equipment
Direct replacement cable for Canon PIXMA iP2600
This ABLEGRID power cord is a non-OEM replacement designed for the Canon PIXMA iP2600 printer. It uses a standard 2-pin figure-8 connector and runs 1.8 metres in length. The black cable carries UL, FCC and CE marks for safety compliance.
Rated for worldwide mains voltages
The cord accepts AC 100-240V at 50 or 60 Hz, making it suitable for international use without a voltage converter. Over-voltage and over-heat protection are built into the design. No active cooling or power-draw figures apply to this passive cable.
Single cable in the package
The box contains one new AC power cord with a 2-prong plug. No software, adapters or additional accessories are bundled. The 30-day money-back promise, 60-day exchange and 360-day warranty are handled by the supplier, not the shop.
How it compares
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
- Price $4.99
- Cheaper than about 95% of the 7,693 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ABLEGRID |
| Product type | Power Cable |
| Product color | Black |
| Size & build | |
| Overall length | 6 ft (1.83 m) |
| Cable length | 6 ft (1.83 m) |
Questions about this item
How do I install the 2-pin figure-8 connector on my Canon PIXMA iP2600 and what is the common mistake?
Align the polarised figure-8 plug with the printer inlet, push firmly until it seats fully; the frequent error is inserting it upside-down, which leaves a gap and prevents power.
What maintenance or replacement will this 6 ft AC cord need over time?
No scheduled maintenance is required; inspect the black PVC jacket periodically and replace the cord if you see cracking, fraying or damaged 2-pin blades.
What limit appears first during sustained use of this UL-listed 100-240 V cable?
The 6 ft length fixes the maximum distance between the wall outlet and the printer; voltage drop or thermal limits are not reached under normal printer loads.
More in Internal PSU & Riser Cables
Similar items
Nippon Labs POW-S6800-6IN 6.1" Molex to 2 x SATA 15-pin internal power cable
- 6.1 in (15.5 cm)
- 1x Molex LP4 male
Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
Micro Connectors ATX 12V 4-Pin CPU Power Extension Cable 8 Inches
Silverstone Technology PP14-PCIE 2x PCIe 8-pin to 12VHPWR internal power cable
- 2x PCIe 8pin female
- 1x 12VHPWR PCIe Gen…
Qinghai Electronics 20-Piece Cable Comb Set — 16×8-pin, 4×24-pin, Silver
- Silver





