ADCAUDX DC-0048 SATA cable 1.6 ft 5 pack blue
Five 1.6 ft blue SATA III data cables with locking latches, rated 6 Gbps and backward compatible
- Rated speed6 Gbit/s
- Connector detailsSata to Sata 7 Pin
- Connector genderFemale-to-Female
- Conductor typeTin
- Product typeSATA Cables
- Product colorBlack/Blue
- 5 cables included for multiple drive connections
- 6 Gbps data rate for fast transfers
- Locking latch on each connector for secure fit
- Thin 30 AWG design simplifies cable routing
- Backward compatible with SATA I and II drives
Five-pack SATA 6 Gbps data cables
This five-pack supplies straight SATA 7-pin cables for connecting SSDs, HDDs or optical drives to motherboards and host controllers. Each 1.6 ft cable uses 30 AWG tin conductors rated for 12 Gbps signalling and carries a blue jacket for quick identification. Locking latches on every connector prevent accidental disconnection during drive swaps. The cables are labelled P1 to P5 to simplify routing in multi-drive or RAID setups.
Upgrade from older SATA I or II cables
Replacing legacy cables with these 6 Gbps links removes a bottleneck when the drive and controller both support SATA III speeds. The jump is worth it whenever the attached equipment is rated for 6 Gbps, because the cable will no longer limit the transfer rate. If the drive or controller only operates at 1.5 or 3 Gbps, the cable simply runs at that lower speed without any configuration required.
Limited to internal data-only connections
These cables carry data only and do not deliver power, so each drive still needs a separate power connection from the PSU. They fit standard 7-pin SATA ports on 2.5 inch and 3.5 inch drives, optical units and RAID controllers, but they cannot be used for external eSATA ports or devices that require a combined power-and-data connector. Maximum reliable length is the supplied 1.6 ft; longer runs would need active signal conditioning not provided here.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 1,954 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | DC-0048 |
| Product type | SATA Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sata to Sata 7 Pin |
| Connector gender | Female-to-Female |
| Size & build | |
| Conductor type | Tin |
Questions about this item
How much clearance does the 1.6 ft cable need behind a drive?
The 1.6 ft straight connectors are built from 30 AWG thin cable that bends easily in tight server cases or drive bays.
What is the step people miss when plugging the locking latch into a motherboard?
Push the 7-pin female connector straight in until the latch clicks; angling it leaves the lock unengaged.
When should one of the five labelled cables be swapped out?
Replace a cable if the latch no longer clicks or if data errors appear on the linked 2.5 or 3.5 drive.
More in SATA & eSATA Drive Cables
Similar items
DKARDU NR-US-050 4-pack 22-pin SATA combo extension cable 50cm
- Optical
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
AYECEHI SATA III 6.0 Gbps cable 90° locking latch blue 12 inch 6 pack
- Sata
- Male-to-Male
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





