ADCAUDX DC-0053 SATA cable 24 inch 3 pack blue
Three blue SATA cables, each 24 inches long, connect drives at up to 6 Gbps with locking latches for a secure fit
- Rated speed6 Gbit/s
- Connector detailsSata to Sata 7 Pin
- Connector genderFemale-to-Female
- Conductor typeTin
- Product typeSATA Cables
- Product colorBlue
- 6 Gbps transfer speed for faster storage upgrades
- Three cables included for spare or replacement needs
- 24-inch length with slim 30 AWG design for tight spaces
- Locking latch on each connector secures the data link
- Backwards compatible with SATA I and SATA II drives
Three-pack 24-inch SATA III data cables
This set contains three straight 24-inch SATA 3 cables with 7-pin female connectors on both ends. They link motherboards or host controllers to SAS and SATA SSDs, hard drives and optical drives. Each cable is rated for 6 Gbps transfer speed and is backward compatible with SATA I and II devices.
Blue 30 AWG thin cables with labelled ends
The blue 30 AWG conductors use a tin solder process for stable signalling in tight spaces. Cables are marked P1 to P3 so you can route them to specific ports or RAID arrays without guesswork. Locking latches on every connector prevent accidental disconnection during vibration or maintenance.
Tool-free push-in installation
Plug each end into a 7-pin SATA port until the latch clicks; no software or drivers are required. The slim profile eases routing behind drive cages but offers no power conductors, so drives must receive power from a separate source. Ensure the latch fully engages or intermittent errors may appear.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | DC-0053 |
| Product type | SATA Cables |
| Product color | Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sata to Sata 7 Pin |
| Connector gender | Female-to-Female |
| Size & build | |
| Conductor type | Tin |
Questions about this item
Will the 30 AWG conductors need replacing after repeated drive swaps?
The 30 AWG tin conductors are built for repeated insertion; the locking latch holds firm so the cable itself rarely needs replacement unless physically damaged.
What limits the 6 Gbps transfer rate during long RAID rebuilds?
The 6 Gbps ceiling is set by the SATA 3 specification; actual throughput will not exceed the slowest connected drive or controller.
Do the thin blue cables run hot or draw extra power when drives run all day?
The cables carry only data and draw negligible power, so they stay cool and add no audible noise during continuous operation.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





