Adiven SATA Cable III 3 Pack 6 Gbps 18 Inch Black
Three 18-inch SATA III cables with locking latches connect 2.5-inch SSDs, 3.5-inch HDDs or optical drives to motherboards at up to 6 Gbps
- Rated speed6 Gbit/s Fast Data Transfer
- Cable length18 in (45.7 cm)
- Connector count2
- Product typeSATA
- Product colorBlack
- Overall length18 in (45.7 cm)
- 6 Gbps data transfer with SATA Revision 3.0 support
- Locking latch on each end secures the connection
- 18 inch length fits full-size desktop cases
- Three cables included for multiple drive installs
- Backwards compatible with SATA I and SATA II devices
Three-cable pack for internal SATA drives
This three-pack supplies straight SATA III cables with locking latches for connecting 2.5-inch SSDs, 3.5-inch HDDs or optical drives to motherboards and host controllers. Each cable measures 18 inches and carries a black finish. The cables handle data only and do not deliver power to the attached drive.
6 Gbps ceiling set by the slowest link
The SATA Revision 3.0 interface permits up to 6 Gbps, yet actual throughput is capped by the lowest-rated device in the chain. Older SATA I or SATA II ports will restrict transfer rates to their own maximums. Cable length and connector quality add no further bottleneck beyond the standard specification.
Check port orientation
Verify that your motherboard or controller offers standard straight SATA ports rather than right-angle variants that could foul the latch. Confirm each target drive receives its own power connection from the PSU, because these cables carry data only. Ensure physical clearance for the 18-inch length in your chassis routing.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Adiven |
| Model name | 3 Pack SATA Cable III 6 Gbit/s Straight HDD SDD Data Cable |
| Product type | SATA |
| Product color | Black |
| Performance | |
| Rated speed | 6 Gbit/s Fast Data Transfer |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 18 in (45.7 cm) |
| Cable length | 18 in (45.7 cm) |
Questions about this item
How do I choose among the cables in this three-pack?
All three cables are identical — 18 inch SATA III data cables with locking latches — so any one will work for a 2.5 inch SSD, 3.5 inch HDD or optical drive.
What does the 6 Gbps rating mean once the cable is installed?
The cable supports SATA Revision 3.0 up to 6 Gbps, but actual transfer speed is limited by the drive and controller you connect.
Which SATA standard does this cable use and what does it cap?
It uses SATA III (Revision 3.0), capping the interface at 6 Gbps while remaining backwards compatible with SATA I and II devices.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





