SAMA Q70-BKWAYNO3-G 360mm liquid cooler with 2.8" LCD display
- Intel&AMD
- AMD:AM5/AM4
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Clear PVC tubing with 8 mm inner and 11 mm outer diameter, 3 m length, resists kinking and handles -10 to 80 °C at 2 bar working pressure
This Alphacool AlphaTube HF is a clear PVC tube made for custom water-cooling loops. Its 8 mm inner diameter and 11 mm outer diameter suit standard push-fit or compression fittings. The three metre length gives enough run for most single-loop builds. It arrives new and ready to cut to length.
The tube is rated for a working pressure of 2 bar and a burst pressure of 8 bar. Its hardness falls between 65 and 70 A-Shore, balancing flexibility with kink resistance. Operating temperature spans -10 °C to 80 °C, covering typical coolant ranges. Exceeding these pressures or temperatures can cause deformation or rupture.
The tubing cuts cleanly with a sharp blade and slides over barbed or compression fittings without excessive force. Warm water can soften it for tight bends, but overheating risks permanent distortion. The main errors are cutting lengths too short, leaving no slack for component movement, and skipping fitting inserts that prevent collar crush.
Measured against everything we stock in Liquid Cooling & AIO Coolers, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Alphacool |
| Model name | MBVB08N416CT1 |
| Product color | Clear |
Both figures describe the same tube: 8 mm is the bore that carries coolant, 11 mm is the outside wall that the compression fitting seals against. You need fittings rated for 8 mm ID / 11 mm OD.
It limits the continuous pressure the pump can generate to roughly 2 bar; above that the tubing may deform or leak, so set pump speed and reservoir height to stay below this value.
The mid-range PVC hardness keeps the tube pliable enough for tight bends without heat, yet stiff enough to resist kinking when routed around GPU blocks and radiator ports.
More in Liquid Cooling & AIO Coolers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?