APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Distributes 28 V AC or DC power across four individually fused outputs on a 5.25 by 3.25 inch UL 294 recognised board
The ALTRONIX PD4UL is a 28 V AC/DC power distribution unit designed for access-control and security installations. It provides four independently fused output circuits from a single 28 V AC or DC input. The board measures 5.25 In long, 3.25 In wide and 1.00 In high and carries UL 294 recognition.
Mount the phenolic or fiberglass board inside a compatible enclosure using the existing holes. Connect the 28 V supply to the input terminals and wire each load to its own fused output. The most frequent error is exceeding the per-fuse current rating or mixing AC and DC loads on the same circuit.
Verify that your system operates at 28 V AC or 28 V DC and that the total load stays within the fuse limits printed on the module. Confirm the enclosure can accommodate a 5.25 In by 3.25 In board with 1.00 In clearance. Ensure UL 294 compliance is required for the installation.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ALTRONIX |
| Model name | PD4UL |
| Product type | Power Distribution Units |
| Power | |
| Supply voltage | 28 V AC 28 V DC |
| Voltage output | 28 V AC 28 V DC |
| Size & build | |
| Shipping weight | 0.23 kg |
| Package size | 152 × 102 × 25 mm |
Measure 28 V AC or DC at each of the four fused outputs with a multimeter while the unit is powered.
The board itself is supplied; you must provide the 28 V AC or DC source, output wiring and any enclosure.
This single model is UL recognised to UL 294 and provides four fused outputs at 28 V AC or DC.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?