APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Power distribution units for equipment racks, from basic outlet bars to metered and remotely switched models. 640 products from $3.99 to $6,133.99. APC, Tripp Lite, CyberPower and more.
640 products from $3.99
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
640 results · page 1 of 11
A basic PDU is a rack-mounted outlet bar: it feeds power to servers and switches and does nothing else. A metered unit adds a display or network reading of current, so you can see how close a circuit is to its limit before adding another server. Switched PDUs go further and let you turn individual outlets on and off remotely, which makes rebooting a frozen device possible without a trip to the rack.
Pay for the features you will actually use. In a small closet a basic unit is enough, while a larger room benefits from metering to balance load across circuits. Remote switching needs a network connection and a secure management setup, so check the access methods the unit supports. Vertical bars save rack height, whereas 1U and 2U horizontal units take rack space.
Start at the wall. The input plug and its amp rating must match the receptacle that feeds the rack: a 15 A unit with a NEMA 5-15P plug fits a standard outlet, while 30 A models often use a locking L6-30P plug on a 208 V circuit. Supply voltage listed as 200 to 240 V will not work on a 120 V outlet. Planners usually load a PDU to around 80 percent of its rating for continuous use.
Then count the outlets by type. C13 outlets feed most servers, switches and monitors using standard IEC cords, while C19 outlets carry heavier loads such as large servers and blade enclosures. Mixed units offer both. Cord length, such as 10 to 15 feet, decides whether the unit reaches the wall without an extension, and rack depth decides whether a long bar fits behind your equipment.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?