Aomoproing 70CM 22 Pin SATA III 6Gbps Data & Power to SATA 7pin Data & Molex 4pin Combo Cable Red
A 70 cm SATA III cable combining 22 pin data and power into a 7 pin data connector and Molex 4 pin power for 2.5 and 3.5 inch drives
Pack 1 Pack
- 1 Pack$8.99
- 2pack$10.99
- 70 cm length fits full-tower builds
- SATA 3.0 6 Gbps bandwidth for fast transfers
- Powers SATA drives from Molex 4-pin
- Supports both 3.5" and 2.5" drives
- Thin cable design improves case airflow
Cable Length and Connectivity
This 70 cm cable combines a 22 pin SATA connection with a 7 pin data lead and a Molex 4 pin power plug. It lets you run both data and power to a SATA drive from a single cable assembly.
Bandwidth and Power Limits
The link supports SATA 3.0 at 6 Gbps, so the practical ceiling is the SATA III specification itself. Power is drawn from a 12 V / 5 V Molex source, meaning the drive receives no more current than that connector can supply.
Upgrade Path and Compatibility
It replaces the need for a separate SATA power cable or a power supply upgrade when only Molex leads are available. The jump is worthwhile when adding a 3.5 inch or 2.5 inch SATA drive to an older chassis that lacks native SATA power outputs.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing SATA 22Pin Power & Data Combo Extension Cable 1ft 2pack
Aomoproing 90 Degree SATA 15-Pin Male to 2 x 15P Female Y Splitter Power Cable
Aomoproing 90 Degree SATA 15-Pin Male to 2 x 15P Female Y Splitter Power Cable 2pack
Questions about this item
Should I pick the 70 cm red cable or a different length for my build?
The cable is 70 cm long and coloured red; choose this length when the drive sits roughly that distance from the Molex connector.
What does the 6 Gbps rating deliver when the cable is installed?
It supports SATA 3.0 bandwidth up to 6 Gbps, so a connected SSD or HDD can run at its native interface speed.
How does the 22 pin to 7 pin plus Molex 4 pin wiring work in practice?
The 22 pin plug splits into a 7 pin data connector and a Molex 4 pin power connector, drawing 12 V and 5 V from the PSU to run 2.5 or 3.5 inch SATA drives.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA










