Aomoproing Mini SAS SFF-8087 36-pin to 4 SATA cable .5 m
Connects a Mini SAS SFF-8087 controller to four SATA drives at up to 10.0 Gbps over 0.5 m
Cable Length 0.5m
- 0.5m$14.99
- 1m$13.99
- Connect up to four SATA drives from one Mini SAS 36-pin controller port
- 0 Gbps data rate supports high-speed storage arrays
- 5 m length keeps server cabling tidy
- Red and black PVC jacket protects copper conductors
- SFF-8087 male to four SATA 7-pin female connectors
Mini SAS SFF-8087 to 4 SATA 0.5 m Cable
This 0.5 metre cable connects a Mini SAS SFF-8087 36-pin male port on a host controller or backplane to four SATA 7-pin female drive connectors. It is built for internal server and storage enclosures where a single controller lane fans out to multiple drives. The red and black PVC jacket covers copper conductors rated for up to 10.0 Gbps data transfer.
Suits compact server builds; not for longer runs
The half-metre length fits tight chassis and short backplane-to-drive distances. Builders needing more reach between controller and drives should choose a longer cable. The fixed straight connectors do not accommodate angled routing requirements.
36-pin SFF-8087 male to four SATA 7-pin female
The single specification that decides fit is the connector pairing: one Mini SAS SFF-8087 36-pin male plug splitting to four SATA 7-pin female receptacles. Verify the controller port and drive backplane match this exact pin-out before ordering.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Aomoproing SFF-8087 to 4x SATA 90° Breakout Cable 1.64ft Blue/Black
Questions about this item
Should I pick a different length or a different connector style for this cable?
This cable is 0.5 m long with a Mini SAS SFF-8087 36 pin male connector on one end and four SATA 7 pin female connectors on the other; no other lengths or connector styles are offered for this model.
What does the 10.0 Gbps figure mean when the cable is installed in a server or workstation?
The 10.0 Gbps rating is the maximum data transfer rate the cable can carry between a Mini SAS host or controller and up to four SATA target drives or a backplane.
Which interface standard does the Mini SAS SFF-8087 end use, and what does it limit in practice?
The Mini SAS SFF-8087 36 pin male connector follows the SAS interface standard and caps the link at 10.0 Gbps per lane for the four SATA drives attached.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA










