Aomoproing SAS Internal 4 SATA Host to 4 SATA 7pin Target 6Gbps Data Server Raid Cable 50cm
Connects four SATA drives to a four-port SAS controller at 6 Gbps over 50 cm
Cable Length 100 cm
- 50 cm$13.99
- 100 cm$16.99
- Connect up to four SATA drives with a single cable
- Supports 6 Gbps SAS specification for fast data transfer
- Four SATA 7-pin host connectors link to four SATA 7-pin target connectors
- 50 cm length fits compact server and RAID builds
- New cable ready for immediate installation
Internal SAS 4 SATA to 4 SATA Cable
This 50 cm internal cable connects four SATA 7-pin drives to a 4 SATA host controller. It meets the 6Gb/s SAS specification for reliable data transfer. The assembly suits server and RAID environments where multiple drives attach to a single backplane or HBA.
Upgrade from single drive cables
Replacing individual SATA leads with this single 4-lane assembly reduces cable clutter and simplifies routing inside dense chassis. The jump is worth it when a controller or backplane presents a 4 SATA host connector and you need to fan out to four separate drive targets.
Suits builders with 4 SATA host ports
This cable fits administrators populating a 4-port SAS or SATA HBA with up to four hard disks or SSDs. It does not suit systems that only offer a single SATA host port per connector or installations requiring longer reach than 50 cm provides.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
1 more in the same range
Questions about this item
What length is the cable and will it reach drives in a standard 4U chassis?
The cable is 50 cm long and connects four SATA 7-pin host ports to four SATA 7-pin target ports.
How do I attach the host end to my RAID controller without damaging the latch?
Align the four SATA 7-pin connectors with the controller ports and press straight in until each latch clicks; do not force at an angle.
When should I replace this cable to keep 6 Gbps reliability?
Replace it if any connector latch breaks, pins bend, or you see intermittent drive drops during array rebuilds.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA






