Aomoproing SATA Cable III 3 Pack 6 Gbps Locking Latch 15.75 Inch Red
Three 15.75-inch SATA III cables with locking latches deliver up to 6 Gbps data transfer for HDDs, SSDs and optical drives
- Product colorRed
- Up to 6 Gbps transfer with SATA 3.0 support
- Locking latches on both ends keep connections secure
- Three cables in one pack for spares or RAID
- 75 inch length fits standard internal drive bays
- Red colour makes cable identification easy in crowded cases
Three-cable SATA III kit
This three-pack of SATA III cables connects motherboards or host controllers to internal hard drives, SSDs and optical drives. Each cable measures 15.75 inch and features a red jacket for easy identification. The cables carry data only and do not supply power to the attached drive.
Sustained 6 Gbps throughput
Revision 3.0 supports up to 6 Gbps transfer rates and remains backwards compatible with SATA I and SATA II devices. Actual throughput is limited by the connected equipment, so the link runs at the highest speed both ends support. Locking latches on both ends keep the connection secure during continuous read or write workloads.
Replaces loose or worn SATA leads
The pack suits builders adding multiple drives, configuring RAID arrays or swapping out damaged cables. It is not for users who need power delivery over the same cable or who require external eSATA connectivity.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Red |
Questions about this item
Does the 15.75 inch SATA III cable generate any heat or noise during continuous data transfers?
The cable itself is passive and produces no heat or noise; only the connected drives and controller consume power.
What separate component must I already have to power the drive attached to this cable?
You need a SATA power connector from your power supply; the cable carries data only.
Will the locking-latch SATA III cable work reliably with an older SATA I motherboard port?
Yes, the cable is backwards compatible with SATA I and SATA II ports, though transfer speed will match the slower port.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





