APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Basic 200-240 V PDU with 14 C13 and 2 C19 outlets, NEMA L6-30P input and 10 ft cord
The APC AP6002A is a basic power distribution unit rated for 200 to 240 VAC input at up to 30 A. It provides sixteen output sockets, fourteen C13 and two C19, fed by a 10 ft cord. The unit is certified to UL and C-UL standards and complies with the RoHS directive.
This PDU fits cabinets that run on 200 to 240 VAC and need a high count of C13 and C19 receptacles from a single 30 A branch circuit. It does not suit sites that require per-outlet metering, remote switching or environmental monitoring.
The 10 ft supply cable terminates in an L6-30P plug, so the facility must provide a matching 30 A, 200 to 240 V receptacle. Without that specific outlet the unit cannot be connected.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Schneider Electric |
| Model name | AP6002A |
| Product type | Basic |
| Storage | |
| Storage elevation | 0–50000 ft |
| Power | |
| Supply voltage | 200–240 VAC +6% to -10% |
| Input line frequency | 50/60 Hz |
| Input current rating | 30A |
| Regulatory derated input current | 24A |
| Input connection | NEMA L6-30P |
| Voltage output | 200–240 VAC +6% to -10% |
| Output outlets | 14 x C13 and 2 x C19 |
| Overload protection | 20A |
| Size & build | |
| Cord length | 10 ft (3.05 m) |
| Product dimensions | 1.85 in × 2.19 in × 32.81 in |
| Product weight | 8.49 lb (3.85 kg) |
| Shipping weight | 5.44 kg |
| Package size | 970 × 165 × 127 mm |
| Environment & compliance | |
| Certified standards | UL / C-UL |
| RoHS compliance | 2011/65/EU - latest revision |
| Operating conditions | 0–50 Celcius degree |
| Operating humidity | 5–95% |
| Operating altitude | 0–10000 ft |
| Storage temperature range | -15–60 Celcius degree |
| Storage relative humidity | 5–95% |
The PDU requires a matching NEMA L6-30R receptacle on a 200-240 VAC circuit rated for up to 30 A.
Yes, the fourteen C13 and two C19 outlets accept standard C14 and C20 equipment plugs without adapters.
Verify that equipment plugged into the C13 and C19 outlets powers on normally and that the total load stays within the 20 A overload protection limit.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?