APC AP7552 PDU 3680VA 230V 16A 20xC13 4xC19 10ft cord
Distributes 230 V AC power to 20 C13 and 4 C19 outlets from a 16 A input with a 10 ft cord
- Supply voltage230 V AC
- Cord length10 ft Power Cord
- Voltage output230 V AC
- Product type008085000
- Key featuresPackage Contents: Basic Rack 3680 VA PDU Installation Guide
- Product dimensions64.0 in Height × 2.2 in Width × 1.7 in Depth
- Distributes 3680 VA to rack equipment via 20 C13 and 4 C19 outlets
- 16 A input and output current supports dense server loads on a single circuit
- 10 ft cord reaches distant power sources without extension leads
- Tool-less vertical mounting fits NetShelter VX rear channels in seconds
- Slim 2.2 in width and 1.7 in depth preserves rack space for compute gear
Basic Rack Power Distribution
The APC AP7552 is a basic rack-mount power distribution unit rated at 3680 VA with a 230 V AC input and output. It supplies power through twenty IEC 320-C13 receptacles and four IEC 320-C19 receptacles. A 10 ft input cord connects the unit to the facility supply. The 16 A rated current matches standard single-phase rack circuits.
Vertical mounting in NetShelter VX
This PDU mounts vertically in the rear channel of a NetShelter VX enclosure using the included toolless mounting kit, occupying zero horizontal rack units. It suits administrators who need high-density outlet distribution without consuming U-space. Builders requiring switched outlets, metering per outlet, or environmental monitoring should look at managed PDU alternatives.
Twenty C13 plus four C19 outlets
The combination of twenty C13 and four C19 receptacles determines whether the unit matches the equipment plug count in your rack. Verify that the total connected load stays within the 16 A rating and that the receptacle mix fits your servers and network gear.
How it compares
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
- Price $339.99
- Cheaper than about 57% of the 640 comparable items (median $458.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | APC |
| Model name | AP7552 |
| Product type | 008085000 |
| Power | |
| Supply voltage | 230 V AC |
| Voltage output | 230 V AC |
| Size & build | |
| Cord length | 10 ft Power Cord |
| Product dimensions | 64.0 in Height × 2.2 in Width × 1.7 in Depth |
| Product weight | 10.7 lb (4.85 kg) |
| Shipping weight | 7.26 kg |
| Package size | 2134 × 178 × 127 mm |
Questions about this item
Does the AP7552 run silently and stay cool during continuous operation?
The AP7552 is a passive Basic Rack PDU with no fans, so it produces no audible noise and generates minimal heat while distributing up to 3680 VA at 230 V.
What rack hardware do I need to mount the 64.0-inch tall PDU in my cabinet?
A toolless mounting kit is included for vertical installation in the rear channel of a NetShelter VX enclosure; no additional brackets or screws are required.
Can I plug legacy servers that still use IEC 320-C13 or C19 cords into this unit?
Yes, the PDU provides 20 IEC 320-C13 and 4 IEC 320-C19 receptacles, matching the connectors found on most rack-mount equipment.
More in Rackmount PDUs
Similar items
Liebert PD2-HDWR-MBS 30 A PDU 208 V 6-Outlet Hardwire MBS
- Product Name:PD2-HD…
- 6 lb (2.72 kg)
APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
Middle Atlantic PDX-215C-SP PDU 15A 2 Outlet Surge Protection 120V NEMA 5-15R/5-15P
APC AP7731 Switched Rackmount PDU 30A NEMA L6-30P 8ft
- FCC Part 15 Class A…
- Switched
Tripp Lite PDUMH15AT PDU 15A 120V 8x5-15R 2x5-15P 12ft 1U
- 1U
- 8 front panel LEDs…





