APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Rack-mount automatic transfer switch supplies 1.44 kVA through ten NEMA 5-15R outlets from a 120 V, 15 A input with an eight-foot cord
The APC AP7750A is a rackmount automatic transfer switch that delivers 1440 VA at 100 V or 120 V. It accepts a single NEMA 5-15P input and provides ten NEMA 5-15R outlets for connected equipment.
This unit suits IT racks where servers or network gear have only one power supply but the site runs two independent feeds. Builds that require more than 12 A derated current or outlets other than NEMA 5-15R should look at other power distribution options.
The 1.44 kVA rating and 12 A regulatory derated input current decide whether the switch can support the intended load. Verify the total connected draw against this limit before deployment.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | APC |
| Model name | AP7750A |
| Product type | Automatic Transfer Switch |
| Design style | Rackmount |
| Storage | |
| Storage elevation | 0–15000 m |
| Power | |
| Supply voltage | 100 V, 120 V |
| Input line frequency | 50/60 Hz |
| Input current rating | 15A |
| Regulatory derated input current | 12A |
| Input connection | NEMA 5-15P |
| Voltage output | 100 V, 120 V |
| Output watts (va) | 1440 VA |
| Output outlets | (10) NEMA 5-15R |
| Size & build | |
| Cord length | 8 ft (2.44 m) |
| Product dimensions | 1.73 in × 17.01 in × 9.29 in (H × W × D) |
| Product weight | 10.36 lb (4.7 kg) |
| Shipping weight | 6.37 kg |
| Package size | 594 × 356 × 112 mm |
| Environment & compliance | |
| RoHS compliance | Yes |
| Operating conditions | -5–45 ºC |
| Operating humidity | 0–95% |
| Operating altitude | 0–3000 m |
| Storage temperature range | -25–65 ºC |
| Storage relative humidity | 0–95% |
The unit is 1.73 inches tall, 17.01 inches wide and 9.29 inches deep, fitting a standard 1U rack opening.
Two NEMA 5-15P cords are required; each plugs into a separate 120 V, 15 A circuit so the switch can transfer between them.
The AP7750A has no internal batteries; it relies on the two live AC sources, so no battery replacement is needed.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?