APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 10 ft locking C19 to NEMA 5-20P power cord rated 120V 20A for secure PDU connections
The APC AP8751 is a single locking power cord that connects a NEMA 5-20P plug to an IEC 320 C19 outlet at 120V and 20A. It is made for IT racks and PDU strips where accidental disconnection must be prevented. The 10 ft length gives routing flexibility in standard cabinets.
Swap this in when standard C19 cords vibrate free under load or during maintenance. The locking C19 latch secures the connection without tools, and the 12 AWG SJT jacket handles the full 20 A rating. The jump is worth it whenever uptime depends on a positive mechanical lock rather than friction alone.
The NEMA 5-20P plug requires a matching 20 A receptacle and circuit breaker. The cord’s 0.45 in outside diameter routes through typical cable managers, and the rubber/plastic jacket is rated from 32 to 221 degrees F. It frees up a C19 inlet on the PDU while eliminating the risk of an unplanned power loss.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | APC |
| Model name | AP8751 |
| Product type | Accessories |
| Power | |
| Input current rating | 20A |
| Input connection | NEMA 5-20P |
| Voltage output | 120 V |
| Output outlets | (1) IEC 320 C19 |
| Size & build | |
| Cord length | 10 ft (3.05 m) |
| Shipping weight | 0.75 kg |
| Package size | 178 × 127 × 76 mm |
Yes, the NEMA 5-20P plug matches a 20 A 120 V receptacle and the 10 ft cord reaches most rack PDUs.
Insert the IEC 320 C19 fully until the latch clicks, then verify the locking tab is engaged on both sides.
Replace it if the jacket shows cracking after sustained exposure near 221 °F or if the rubber becomes brittle below 32 °F.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?