APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A metered PDU delivering 200-208V power with 36 C13 and 6 C19 outlets, NEMA L6-30P input, and remote monitoring for load management
The APC AP8841 is a metered vertical rack Power Distribution Unit built for 200-208 V three-phase environments. It delivers 36 IEC C13 and 6 IEC C19 outlets from a single NEMA L6-30P input. Data-centre operators use it to monitor real-time load and receive SNMP or web alerts before circuits reach the 24 A derated limit.
Confirm your facility supplies 200 V, 208 V or 230 V at 50/60 Hz and that the upstream breaker can sustain 30 A through a NEMA L6-30P plug. The 9.84 ft cord must reach the panel without strain. Ensure attached equipment uses C13 or C19 plugs and that total draw stays within the 5.0 kW rated capacity.
The 0U form factor mounts in the rear of standard cabinets without consuming horizontal U height, freeing room for servers and switches. Locking IEC receptacles prevent accidental disconnects under vibration. A temperature-humidity sensor port adds environmental monitoring while ultra-low-profile breakers keep the profile tight against the rack rail.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | APC |
| Model name | AP8841 |
| Product type | Metered |
| Storage | |
| Storage elevation | 0–50000 ft |
| Power | |
| Supply voltage | 200 V, 208 V, 230 V |
| Input line frequency | 50/60 Hz |
| Input current rating | 30A |
| Regulatory derated input current | 24A |
| Input connection | NEMA L6-30P |
| Voltage output | 200 V, 208 V |
| Output outlets | IEC 320 C13 IEC 320 C19 |
| Overload protection | Yes |
| Size & build | |
| Cord length | 9.84 ft (3 m) |
| Product dimensions | 70.51 in × 2.2 in × 1.73 in |
| Product weight | 15.08 lb (6.84 kg) |
| Shipping weight | 9.12 kg |
| Package size | 1994 × 114 × 114 mm |
| Environment & compliance | |
| Certified standards | CSA C22.2 No. 60950, IEC 60950, METI Denan, UL 60950-1, VDE |
| RoHS compliance | Yes |
| Operating conditions | 5–45 Celcius degree |
| Operating humidity | 5–95% |
| Operating altitude | 0-10000 ft (0-3000 m) |
| Storage temperature range | -25–65 Celcius degree |
| Storage relative humidity | 5–95% |
The PDU is designed for 0U vertical mounting in a standard rack; brackets are integrated so no separate kit is required.
This model provides exactly 36 IEC C13 and 6 IEC C19 outlets, suited for a blend of standard and high-density equipment.
The regulatory derated limit is 24 A, giving up to 5.0 kW at 200-208 V for continuous three-phase load balancing.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?