APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1U rackmount PDU delivering 208 V power to ten C13 outlets from a 30 A NEMA L6-30P input with overload protection
The APC AP9571A is a horizontal 1U basic power distribution unit. It accepts 200V to 240V input through a NEMA L6-30P plug with a 12 ft cord. Ten IEC 320 C13 outlets deliver 208V output with overload protection. It operates from -15 to 45 °C at up to 4500 m elevation.
This unit suits racks where ten C13 inlets must be powered from one 30A circuit. Builders needing more than ten outlets or a different outlet mix should look elsewhere. Installations requiring metering, switching or remote monitoring need a managed PDU instead. Sites without a NEMA L6-30P receptacle cannot use this model.
The PDU connects only via a NEMA L6-30P plug rated for 30A maximum input current. Regulatory derating limits continuous draw to 24A on the 208V output. If the facility provides a different plug type or a lower-rated circuit, this unit will not install without infrastructure changes.
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | APC |
| Model name | AP9571A |
| Product type | Basic |
| Storage | |
| Storage elevation | 0–15000 m |
| Power | |
| Supply voltage | 200 V, 208 V, 230 V |
| Input line frequency | 50/60 Hz |
| Input current rating | 30A |
| Regulatory derated input current | 24A |
| Input connection | NEMA L6-30P |
| Voltage output | 208 V |
| Output outlets | (10) IEC 320 C13 |
| Overload protection | Yes |
| Size & build | |
| Cord length | 12 ft (3.66 m) |
| Product dimensions | 1.73 in × 17.52 in × 3.03 in (H × W × D) |
| Product weight | 5.6 lb (2.54 kg) |
| Shipping weight | 4.08 kg |
| Package size | 483 × 174 × 171 mm |
| Environment & compliance | |
| Certified standards | cUL Listed, PSE, UL 60950, UL Listed |
| RoHS compliance | Yes |
| Operating conditions | -15–45 °C |
| Operating humidity | 5–95% |
| Operating altitude | 0–4500 m |
| Storage temperature range | -25–65 ºC |
| Storage relative humidity | 5–95% |
Use the supplied brackets to secure the 17.5 inch wide unit in a 1U space; the step often missed is tightening both front and rear bracket screws to prevent the 2.54 kg unit from sagging.
The basic PDU has no user-serviceable parts; plan to replace the entire unit if the NEMA L6-30P plug or any of the ten C13 outlets show physical damage or overheating.
The regulatory derated input current of 24 A is the first limit; sustained loads above 4.99 kVA will trip the overload protection even though the plug is rated for 30 A.
More in Rackmount PDUs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?