APC APDU10452SW Switched PDU 17.3 kW 208 V 21 Outlets
Switched rack PDU delivers 17.3 kW at 208 V across 21 IEC outlets with Ethernet remote management
- Product typeSwitched
- Switched outlet control enables remote power cycling per device
- 3 kW capacity supports high-density rack deployments
- 21 mixed IEC outlets fit diverse equipment plugs
- Ethernet management with SNMP and HTTPS allows secure monitoring
- 6 ft input cord with IEC 60309 460P9 plug simplifies installation
Switched PDU for 17.3 kW Loads
The APC APDU10452SW is a rack-mountable switched power distribution unit rated at 17.3 kW and 17300 VA. It accepts three-phase AC input from 200 to 240 V and delivers 208 V output through 21 IEC 60320 outlets. Network management runs over Ethernet with SNMP, HTTP and HTTPS for remote outlet control and monitoring.
Rack Mount with 6 ft Cord and IEC 60309 Input
The unit mounts in a standard rack and ships with a 6 ft input cord terminated by an IEC 60309 460P9 connector. Installation requires a compatible three-phase source and enough rack depth for the 24.47 lb chassis. Common issues arise when the facility receptacle does not match the 460P9 pinout or when outlet types are not verified against attached equipment cords.
Sustained 17.3 kW Delivery with Remote Switching
Under continuous load the PDU distributes up to 17.3 kW across its 21 outlets while the switched architecture allows individual outlet cycling over the network. The Ethernet interface supports 10/100 and 10/100/1000 links for reliable telemetry during extended operation. It is not suited for single-phase environments or for racks that lack a 460P9 supply.
How it compares
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
- Price $2,819.99
- Pricier than about 93% of the 640 comparable items (median $458.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product type | Switched |
| Size & build | |
| Shipping weight | 1.81 kg |
| Package size | 1826 × 76 × 56 mm |
Questions about this item
How can I verify the PDU is operating correctly after installation?
Check the local display for input voltage near 208 V and confirm each of the 21 outlets shows expected load; then access the web interface via Ethernet 10/100/1000 to review SNMP or HTTPS status logs.
What ships with the unit and what must I source separately?
The PDU arrives with a 6 ft cord terminated by an IEC 60309 460P9 plug; you must supply rack mounting hardware and the 21 C13/C15 or C19/C21 cables that match your equipment.
Which outlet mix should I select for a 17.3 kW three-phase deployment?
All 21 outlets support both C13/C15 and C19/C21 pin-outs, so choose cables that fit your servers; the 17300 VA capacity and 200-240 V three-phase input remain the same regardless of cable choice.
More in Rackmount PDUs
Similar items
Eaton EVMAL630X PDU 208V 42 Outlets 24A 5.8kW L6-30 10ft 0U
- Power Distribution…
APC AP7723 Switched Rackmount PDU 20A 230V 8xC13 1xC19
- cUL Listed, EN 5502…
- Switched
APC APDU11250SW Switched PDU 11.5kW 3Phase 415V 20A 520P6 42 Outlet
- Power Distribution…
- PDUs & Line Conditi…
APC AP7731 Switched Rackmount PDU 30A NEMA L6-30P 8ft
- FCC Part 15 Class A…
- Switched
APC APDU9966 Switched PDU 0U 17.3kW 208V 20 C13/C15 12 C19/C21
- Switched





