Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Four 100 x 100 mm pink pads at 0.5 mm thickness transfer heat at 1.2 W/mK and stay flexible from -40 to 150 °C
The ARCTIC COOLING ACTPD00020A thermal pad bridges uneven surfaces between components and heatsinks. Each pad measures 100 x 100 mm with a 0.5 mm thickness and 1.2 W/mK conductivity. The pack contains four pink pieces rated for long-term use from -40 to 150 C. Builders needing thinner or thicker gap-filling options cannot use this single thickness.
The silicone-based material carries a UL 94 V-0 flammability rating and 1 x 10^12 O-cm volume resistivity for electrical safety. At 20 Shore 00 hardness and 2.3 g/cm3 specific gravity, it compresses easily under mounting pressure without pumping out. A 3.9 dielectric constant at 1 MHz and 0.4 KN/m tear strength ensure stable insulation during repeated thermal cycles. Systems requiring higher conductivity pads for extreme overclocking will find this rating insufficient.
Non-stick surfaces allow removal and repositioning without residue or damage to sensitive processor chips. The pads require no curing time and stay flexible across the operating range. A 2018 PC Games Hardware review highlighted the flexibility and reusability as key value factors. Users expecting adhesive-backed pads or pre-cut shapes for specific GPU models must prepare their own cutting tools.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ARCTIC COOLING |
| Model name | ACTPD00020A |
| Performance | |
| Thermal conductivity | 1.2 W/mK |
| Environment & compliance | |
| Continuous-use temperature | -40 to 150 °C |
Peel the protective film, place the pad on the component, and press gently. The low 20 Shore 00 hardness makes it very soft, so avoid stretching or pulling during positioning.
The pads are reusable and non-drying. German magazine PC Games Hardware praised their long-term flexibility in 11/2018, so they typically last the lifetime of the hardware unless physically damaged.
The long-term operating range is -40 to 150 C. The UL 94 V-0 rating confirms the material self-extinguishes, so sustained heat up to 150 C will not cause degradation.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?