Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Thermal paste, thermal pads and compound kits for fitting CPU and GPU coolers, sold in syringes, small tubes and larger tubs. 498 products from $1.37 to $1,062.99. Thermal Grizzly, GELID SOLUTIONS, ARCTIC COOLING and more.
498 products from $1.37
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
498 results · page 1 of 9
Listings quote thermal conductivity in W/mK, and figures from 8.5 up to 20 or more look like a clear ladder. They are not, because each maker measures differently and a good paste on a well-mounted cooler gains only a few degrees over a decent one. Treat the number as a rough guide, then look at the temperature range, consistency and whether the pack includes a spatula and wipes.
The very highest figures usually belong to liquid metal, which conducts electricity, so a stray drop beside the chip can short components on the board, and a few metal-filled pastes conduct too. Liquid metal also reacts with aluminum, so it belongs only on copper or nickel-plated surfaces. Ceramic or silicone-based pastes sold as non-conductive are the forgiving choice for a first build; check the listing for that wording.
A single processor needs only a pea-sized amount, roughly 0.1 to 0.2 grams, so small tubes cover several applications and large tubs suit repair benches or frequent upgrades. Check the continuous-use temperature range if the part runs hot, such as a graphics chip or an overclocked processor. Very small syringes are enough for one cooler, while a bulk tube makes sense if you service many machines and want to avoid running out.
Thermal pads are a different tool: they fill larger gaps over memory chips and voltage regulators where paste would be too thin. Pick the thickness that matches the gap, and clean off old paste with isopropyl alcohol before reapplying. Dry, cracked or pumped-out paste is a sign that it is time to redo the job.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?