Arctic Silver AS5-3.5G thermal paste 3.5g tube
- 3.5g
- -50 to 130 °C
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 25 g syringe of ceramic-based thermal compound that is electrically non-conductive and rated for long-term use from -150 °C to 130 °C
Arctic Silver CMQ2-25G is a 25-gram syringe of ceramic-based thermal compound designed for processor and graphics-card heat spreaders. The polysynthetic suspension fluid carries a tri-linear blend of aluminum oxide, zinc oxide and boron nitride that is electrically non-conductive and non-capacitive. Average particle size is below 0.36 microns for thin, even coverage.
Enthusiasts who want a pure electrical insulator with easy cleanup will appreciate the ceramic formula and innovative dispenser. The tube holds approximately 9.2 cc, enough for roughly 200 square inches at a 0.003-inch layer. Buyers covering very large dies or multiple devices should verify the volume meets their needs.
One syringe provides about 9.2 cc of compound, covering approximately 200 square inches when spread to a 0.003-inch thickness. This figure directly decides whether a single tube is sufficient for the intended number of CPU or GPU installations.
Measured against everything we stock in Thermal Paste, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Arctic Silver |
| Model name | CMQ2-25G |
| Part number | CMQ2-25G |
| Size & build | |
| Net content | 25g |
| Shipping weight | 0.04 kg |
| Package size | 169 × 27 × 19 mm |
| Environment & compliance | |
| Continuous-use temperature | -150 to 130 °C |
One 25 g syringe provides roughly 9.2 cc of compound, covering about 200 square inches when spread to a .003 inch thickness.
Dispense a small drop onto the centre of the CPU heat-spreader, then mount the cooler straight down; the clamping pressure spreads the compound into a thin, uniform layer without air pockets.
Re-apply whenever the cooler is removed or if CPU load temperatures rise noticeably; the ceramic formula does not dry out, but physical disturbance breaks the thermal bond.
More in Thermal Paste
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?