ASHATAnt3che7dgm 2 Port PCIe to RS232 Data Adapter 2.5Gb/s
Adds two RS-232 serial ports via a PCI-Express x1 slot at 2.5 Gb/s full duplex with 256-byte FIFO and 250k/sec transfer
- Cable length5 in (12.7 cm)
- First connector30
- Connector typeStandard
- Units per package1
- Product typeBlack
- Product colorBlack
- Adds two serial ports through a PCI-Express x1 slot
- 5 Gb/s full-duplex channel keeps data moving fast
- 16C550-compatible UART with 256-byte FIFO buffers
- Up to 250k bits per second transfer rate
- Drivers for Windows, Linux, DOS and iOS included
Two-Port PCIe RS232 Adapter
This expansion card adds two RS-232 serial ports to a desktop or server through a single PCI Express x1 lane. It uses a WCH382 controller and presents a standard 16C550-compatible UART with 256-byte transmit and receive FIFOs. The board operates at a 2.5Gb/s full-duplex link rate and supports data signalling up to 250k per second. Drivers are supplied for Windows 2000 through 8, Linux, DOS and iOS.
For Legacy Serial Integration
The card suits engineers, technicians and IT staff who need to connect industrial equipment, point-of-sale hardware, medical instruments or older networking gear that still relies on RS-232 signalling. It is not intended for users who require USB, parallel or proprietary industrial bus interfaces, nor for builds that lack a free PCI Express x1 slot. Buyers needing more than two serial channels should consider a different solution.
Build Integration Notes
Installation requires one available PCI Express x1 slot and the low-profile baffle included in the package. The adapter draws power directly from the slot and ships with a short internal cable assembly measuring approximately 5 inches. Its compact footprint of roughly 12 by 8.5 by 2 centimetres and 49-gram weight leave ample clearance in tight chassis, freeing rear-panel space for other I/O.
How it compares
Measured against everything we stock in Interface & Card Adapters, at today’s prices. Recalculated every night.
- Price $21.99
- Typical for this category: the median of 353 items is $21.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Product line | ASHATAnt3che7dgm |
| Model name | ASHATAnt3che7dgm |
| Part number | ASHATAnt3che7dgm |
| Product type | Black |
| Product color | Black |
| Ports & slots | |
| First connector | 30 |
| Connector type | Standard |
| Size & build | |
| Cable length | 5 in (12.7 cm) |
| Product dimensions | 14.33 in W × 12.83 in H × 9.06 in D |
| Product weight | 0.13 kg |
| In the box | |
| Units per package | 1 |
| In the box | No |
Questions about this item
My PC has a free PCI-Express x1 slot; is that the only hardware I need to add this card?
Yes, the card requires one available PCI-Express x1 slot and includes a low-profile baffle for smaller cases.
Will the WCH382 chip work with legacy software that expects a standard 16c550 UART and 256-byte FIFO?
The chip is compatible with the standard 16c550 UART and provides 256-byte transmit and receive FIFOs for legacy software.
After installing the card, how can I confirm the two RS-232 ports are operating at up to 250k bit/s?
Check Device Manager for two new COM ports, then run a serial loopback test at 250k bit/s on each port.
More in Interface & Card Adapters
Similar items
Fervit M20 Locking IP68 USB 3.1 10Gbps Type-C Female to Female Data Adapter
Silverstone ECD01 USB 2.0 to dual RS232 data adapter
- ATX Mid Tower





