ASUS RS700-E11-RS4U-16W10G 1U rackmount barebone server
1U dual-socket barebone server for Intel Xeon Scalable CPUs with 32 DDR5 slots, four 3.5-inch hot-swap bays, PCIe 5.0 expansion and 10 GbE networking
- ProcessorIntel Xeon Processor Scalable Family
- Installed RAMNo Memory Installed
- Form factor1U Rackmount
- Processor socketLGA 4677
- Target workloadGeneral Purpose Server
- Preinstalled processorNo CPU Installed
- Ready for dual-socket Xeon processing with LGA 4677 socket
- 32 DDR5 memory slots support up to 4800 MT/s speed
- Four 3.5" hot-swap bays enable NVMe/SATA/SAS storage flexibility
- Up to four PCIe 5.0 expansion slots for GPU and networking
- 1600W 1+1 redundant 80 Plus Platinum power supplies included
Dual-Socket 1U Barebone for Xeon Scalable
The ASUS RS700-E11-RS4U-16W10G is a 1U rackmount barebone server designed for dual Intel Xeon Scalable processors using the LGA 4677 socket. It targets organisations building general-purpose or AI inference platforms that need high memory capacity and PCIe 5.0 expansion in a single rack unit. No CPU, memory or storage is installed, so integrators supply every active component.
Tool-Less Bays and Redundant Power Simplify Build
Four front 3.5-inch hot-swap bays accept NVMe, SATA or SAS drives, though SAS requires a separate HBA or RAID card. Two M.2 slots and up to four PCIe 5.0 slots — including one OCP 3.0 and one full-height full-length — provide flexible I/O. A 1600W 1+1 redundant 80 Plus Platinum power supply is pre-installed, removing the need to source matching units. The EVAC heatsink design supports higher-TDP processors but demands careful airflow planning in dense racks.
EVAC Cooling Sustains High-TDP Chips Under Load
Enhanced volume air cooling keeps dual Xeon processors stable during prolonged AI training or HPC runs, avoiding the throttling seen in shorter bursts. The Intel C741 chipset and DDR5 4800 memory architecture maintain bandwidth across all 32 DIMM slots during sustained workloads. Dual 10 Gigabit Intel I710-AT2 ports and the OCP 3.0 slot prevent network bottlenecks when moving large datasets continuously. ASMB11-iKVM with ASPEED AST2600 enables remote monitoring without OS dependence.
How it compares
Measured against everything we stock in Barebone Servers & DIY Kits, at today’s prices. Recalculated every night.
- Price $2,088.99
- Cheaper than about 61% of the 532 comparable items (median $2,503.49).
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ASUS |
| Model name | RS700-E11-RS4U-16W10G |
| Target workload | General Purpose Server |
| Processor | |
| Processor | Intel Xeon Processor Scalable Family |
| Processor socket | LGA 4677 |
| Preinstalled processor | No CPU Installed |
| Chipset | Intel C741 |
| Memory | |
| Installed RAM | No Memory Installed |
| RAM slots | 32 × 288Pin |
| Supported memory | DDR5 4800 (1DPC)/4400(2DPC) |
| Storage | |
| Preinstalled storage | No Storage Installed |
| SATA ports | 4 x NVMe/SATA/SAS* (HBA//RAID card is required to support SAS hard drives) |
| M.2 slots | 2 |
| 3.5" bays | 4 × 3.5 in hot-swap bay |
| Connectivity | |
| Primary LAN controller | Intel I710-AT2 |
| Top LAN speed | 10 Gigabit |
| Ports & slots | |
| PCIe slots | Up to 3+1 PCIe slot 1 x OCP 3.0 or PCIe G5 x16 FHFL 1 x PCIe G5 x16 FHFL 1 x PCIe G5 x8. LP (Internal) 1 x PCIe G5 x16, LP |
| Front USB ports | 2 x USB 3.2 Gen1 |
| VGA ports | 1 x VGA (Rear) |
| Rear USB ports | 2 x USB 3.2 Gen1 |
| Ethernet port | 2 × 10GbE LAN ports (RJ45) |
| Extra ports | 1 x RJ-45 Management LAN port |
| Power | |
| Power supply | 1600 W Redundant 1+1, 80 Plus Platinum |
| Size & build | |
| Form factor | 1U Rackmount |
| Product dimensions | 33.17 in × 17.3 in × 1.73 in |
| Product weight | 49.74 lb (22.6 kg) |
| Shipping weight | 14.06 kg |
| Package size | 1143 × 597 × 203 mm |
Questions about this item
How can I confirm the RS700-E11-RS4U-16W10G is working correctly after installing CPUs and memory?
Connect a monitor to the rear VGA port, then use the ASMB11-iKVM with ASPEED AST2600 to watch POST codes and reach the BIOS setup screen, verifying all 32 DIMM slots and both LGA 4677 sockets are detected.
What components are included with the barebone and which must be purchased separately?
The 1U chassis ships with the C741 chipset board, 1600W 1+1 redundant 80 Plus Platinum power supplies, EVAC heatsinks, four 3.5-inch hot-swap bays, two M.2 slots, and the ASMB11-iKVM module; you must add 5th Gen Xeon Scalable CPUs, DDR5 4800/4400 RDIMMs, NVMe/SATA/SAS drives plus an HBA/RAID card for SAS, and any PCIe 5.0 add-in cards.
Which memory speed should I choose for the 32 DDR5 slots?
Populate one DIMM per channel to run at DDR5 4800; if you fill two DIMMs per channel the supported speed drops to DDR5 4400, so match the configuration to your capacity and bandwidth needs.
More in Barebone Servers & DIY Kits
Similar items
GIGABYTE R184-S90-AAV1 barebone server 1U dual Xeon 6 4-bay Gen5 NVMe/SATA/SAS-4 32 DIMM
- Xeon 6 Processors,…
- 1U Rackmount
ASUS RS700-E12-RS4U-2KW10G barebone server 1U dual Xeon 6 32 DDR5 4 NVMe 2000W
- 1U Rackmount
ASRock Rack 4U60L8E-GENOA/2T barebone server 4U 60-bay 800W
- EPYC 9005 & 9004 Se…
- 4U Rackmount
ASUS RS520A-E12-RS12U-16W1G2.5R 2U barebone server
- Supports AMD EPYC 9…
- 2U Rackmount





