BattleBorn CB-M2SATA-BlackB 4-pin Molex to 2 x SATA data adapter 30cm
Splits one 4-pin Molex connector into two SATA power connections with a 30 cm braided cable
- Cable length30 ft (9.14 m)
- Product colorBlack
- Product weight0.1
- Adds two SATA power ports from one Molex connector
- 30 cm braided cable keeps builds tidy
- Premium sleeved sheathing resists wear and looks clean
- Compatible with all standard power supplies
- Lightweight at .1 kg for easy routing
Power-supply expansion
This BattleBorn adapter converts a single 4-pin Molex connector into two SATA power plugs so you can add drives without replacing the PSU. The 30 cm braided sleeve keeps routing tidy inside the case. It is aimed at builders who need extra SATA power from an existing Molex lead.
Suited for SATA drives only
The cable works for anyone adding SSDs or hard drives that use standard SATA power. It will not help builders who need PCIe power for graphics cards or EPS power for motherboards. Users without a free Molex connector on their PSU should look at a different adapter.
One Molex to two SATA plugs
The single specification that decides fit is the 4-pin Molex input splitting into two SATA power outputs. Check that your power supply has a spare Molex header and that your drives use SATA power before buying.
How it compares
Measured against everything we stock in Interface & Card Adapters, at today’s prices. Recalculated every night.
- Price $5.99
- Cheaper than about 99% of the 353 comparable items (median $21.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | BattleBorn |
| Model name | CB-M2SATA-BlackB |
| Product color | Black |
| Size & build | |
| Cable length | 30 ft (9.14 m) |
Questions about this item
Will this 30 cm adapter reach a SATA drive mounted in a lower bay when the Molex connector comes from an older PSU?
The cable is 30 cm long, so measure the distance from your power supply Molex output to the drive bay before installing.
How can I confirm the adapter is delivering power to both SATA devices after I plug it in?
Check that each connected drive spins up and appears in the system BIOS or operating system disk utility.
Does the package include any extra Molex plugs or SATA cables, or just the single 4-pin to dual SATA adapter?
Only the 4-pin Molex to 2 x SATA braided adapter is supplied; no additional cables or connectors are included.
More in Interface & Card Adapters
Similar items
BattleBorn CB-M5SATA-BlackB 4-Pin Molex to 5 SATA data adapter 30cm
- 30 ft (9.14 m)
- Black





