BENFEI 000219black-3p SATA III cable 3-pack 18 inch black
Three SATA III cables with locking latches provide 6 Gbps data links for 2.5" SSDs, 3.5" HDDs and optical drives
- Rated speed6 Gbit/s
- Connector detailsSata III
- Connector genderMale-to-Male
- Conductor typeCopper
- Product typeSATA III
- Product colorBlack
- Up to 6 Gbps transfer with SATA 3.0 support
- Locking latch on each end secures the connection
- 18 inch length fits standard internal drive bays
- Three cables in one pack for multiple devices
- Backwards compatible with SATA I and SATA II
Three-cable SATA III kit
This BENFEI 000219black-3p pack supplies three 18-inch SATA III cables for linking motherboards or host controllers to internal hard drives, SSDs and optical drives. Each cable uses a male-to-male design with a locking latch to keep the connection firm during data transfers. The black finish helps the cables blend into dark chassis interiors.
6 Gbps sustained throughput
Rated at 6 Gbps under the SATA 3.0 revision, the cables maintain that bandwidth across the full 45.7 cm length rather than only in short bursts. Copper conductors and the locking latch reduce signal loss when drives run continuous read or write workloads. Backward compatibility with SATA I and II means older drives still operate at their rated speeds.
Data-only connection
These cables carry data only and do not deliver power to the attached drive, so a separate power cable from the power supply is required for every device. Buyers who need a combined power-and-data lead or an angled connector for tight clearances will need a different product.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | BENFEI |
| Model name | 000219black-3p |
| Product type | SATA III |
| Product color | Black |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sata III |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Does the 6 Gbps SATA III cable generate noticeable heat or noise during continuous all-day operation?
No, the passive copper conductors carry only data signals and draw negligible power, so the cables run silently and stay at ambient temperature even under constant 6 Gbps throughput.
What separate component must already be installed to power the drives connected with these cables?
Each drive requires its own SATA power connector from the PSU; the 18-inch data cables provide only the 7-pin signal link and deliver no power.
Will the locking-latch SATA III cables work reliably with older SATA I or SATA II hard drives and optical drives?
Yes, the 6 Gbps cables are fully backwards compatible and will negotiate the maximum speed supported by the legacy drive, while the locking latch ensures a secure fit on any standard 7-pin port.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





