BENFEI SATA III 6 Gbps Cable 18 Inch Blue Locking Latch
Connects SATA drives to motherboards at up to 6 Gbps with locking latches for a secure fit
- Rated speed6,000 MB/s
- Connector genderMale-to-Male
- Conductor typeCopper
- Product typeSATA III
- Product colorBlue
- Overall length450 mm
- 6 Gbps peak throughput from SATA 3.0 revision
- Locking latches on both ends prevent accidental disconnects
- 450 mm length suits compact chassis routing
- Male-to-male copper conductors link drives to motherboards
- Backwards compatible with SATA I and SATA II devices
Connect Internal Drives
The BENFEI SATA III cable links motherboards and host controllers to 2.5 inch SSD, 3.5 inch HDD and optical DVD drives for expanded storage. It carries data only and does not supply power to the attached device. The male-to-male design fits standard 7-pin ports on drives and controller cards.
Signal Integrity
A locking latch on each end secures the connection against vibration and accidental disconnection during operation. Copper conductors support the 6000 megabytes_per_second SATA 3.0 specification while remaining backward compatible with earlier revisions. The low-profile blue jacket eases routing inside tight chassis spaces.
18 Inch Length
At 450 millimeters the cable reaches drives mounted in typical mid-tower bays without excess slack that blocks airflow. Builders needing longer runs for full-tower or external enclosures should select a different length. The single-cable pack suits one drive addition or a spare for RAID maintenance.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $10.99
- Cheaper than about 65% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | BENFEI |
| Model name | 000183black-1p |
| Product type | SATA III |
| Product color | Blue |
| Performance | |
| Rated speed | 6,000 MB/s |
| Ports & slots | |
| Connector gender | Male-to-Male |
| Size & build | |
| Overall length | 450 mm |
| Conductor type | Copper |
Questions about this item
How do I fit the 18-inch SATA III cable with locking latches into a cramped drive bay?
Route the low-profile jacket first, then press each 7-pin L-type connector straight in until the stainless-steel clip clicks — forcing it at an angle bends the pins.
Will the copper conductors or locking clips wear out if I swap drives every few months?
The copper conductors are rated for the cable's lifetime; the stainless-steel clips resist fatigue, so only replace the cable if a latch snaps or a pin bends.
At what point does the 6 Gbps rating stop being the bottleneck during long RAID rebuilds?
The 6 Gbps ceiling is reached first; sustained throughput will not exceed the slowest attached drive or controller, even with the 450-millimetre length.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
iKKEGOL USB 2.0 to 2.5" 3.5" 5.25" SATA OTB Adapter
- 3 ft (0.91 m)
- 1 x eSATA to 1 x eS…





