BENFEI SATA III 6Gbps Cable 3-Pack 18 Inch Blue Locking Latch
Three 18-inch blue SATA III cables with locking latches connect 2.5" SSDs, 3.5" HDDs and optical drives at up to 6 Gbps
- Rated speed6,000 MB/s
- Connector detailsSata
- Connector genderMale-to-Male
- Conductor typeCopper
- Product typeSATA
- Product colorBlue
- Secure connections with locking latch on each end
- Fast data transfer up to 6Gbps with SATA 3.0
- Backward compatible with SATA I and II drives
- 18 inch length for easier cable routing
- Three cables included for spare or replacement use
Three-Pack SATA III Data Cables
This three-pack supplies 18-inch SATA III cables with locking latches for connecting internal hard drives, SSDs or optical drives to a motherboard or host controller. Each cable uses copper conductors and supports the 6 Gbps SATA 3.0 specification while remaining backward compatible with SATA I and II devices. The blue low-profile jacket helps routing inside tight cases.
Suits builders adding multiple drives.
The cables suit anyone installing several 2.5 or 3.5-inch drives, a DVD writer or a RAID controller card who wants spare or replacement data links in one purchase. They carry data only, so builders who need combined power and data in a single cable must look elsewhere. The 18-inch length may also fall short in full-tower chassis where drives sit far from the motherboard.
Plug-in installation with locking latch
Installation is plug-and-play with no software required; the L-type keyed receptacle and stainless-steel locking clip click onto each SATA port to prevent accidental disconnection. The main issue is forgetting that the cable supplies no power, so a separate SATA power lead from the PSU is still needed for every drive. Ensure the latch fully engages or the link may drop to a lower speed.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $9.99
- Cheaper than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | BENFEI |
| Model name | 000183black |
| Product type | SATA |
| Product color | Blue |
| Performance | |
| Rated speed | 6,000 MB/s |
| Ports & slots | |
| Connector details | Sata |
| Connector gender | Male-to-Male |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What type of drive connectors must my motherboard or host controller have for these cables to fit?
Your motherboard or host controller needs standard 7-pin SATA data ports; the cables are male-to-male and lock into those ports.
Will these cables work with older SATA I or SATA II drives I plan to keep?
Yes, the cables are backward compatible with SATA I and SATA II devices, though transfer speed will be limited by the drive's own rating.
How can I confirm the cables are running at the full 6 Gbps after installation?
Check the negotiated link speed in your BIOS or operating-system storage utility; it should report 6 Gbps when both the drive and controller support SATA III.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Coolgear SS-AZX12MPSS SATA 12" Male-Female Extension Cable (7 Pin) Red
- Sata 7-pin
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Werleo SATA Power Splitter Cable 15 Pin Male to 2 Female 20 cm 2 Pack
- 1 SATA to 2x SATA





