BONAEVER 3 Pack 4 Pin Molex to SATA Power Cable 8 Inches
Three 8-inch Molex-to-SATA power cables connect new SATA drives to legacy power supplies
- Case styleProtection Case
- Connect latest SATA drives to legacy Molex power supplies
- Three cables included for spare or replacement needs
- 20 cm length suits internal cable management
- Works with 5 V SATA devices on 12 V ATX supplies
- Compatible with listed SSDs, optical drives and PSUs
Three-Cable Kit for Legacy Power Supplies
This three-pack converts 4-pin Molex connectors to SATA power for hard drives or optical drives. Each cable measures 8 inches and ships in a protective case. The straight connectors suit internal cable routing in desktop builds. A cost-effective bundle for upgrades or repairs.
DIY Builders and Repair Technicians
Ideal for installers adding SATA drives to older power supplies that only offer Molex ports. Not for systems that already provide native SATA power connectors or for drives needing a different supply rail.
Molex-to-SATA Power Conversion
Each cable bridges a 4-pin Molex LP4 source to a SATA device power input. Compatible with 5 V SATA drives on 12 V ATX supplies. Sample-tested with units such as the Antec VP-450W and EVGA 430W power supplies plus SSDs from Crucial, Intel and Kingston.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $8.99
- Cheaper than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Case style | Protection Case |
Questions about this item
Can I use these Molex-to-SATA cables to connect a 2.5-inch SSD to an older power supply that only has 4-pin Molex ports?
Yes, the cables adapt 4-pin Molex ports to SATA power, letting you run 5 V SATA devices such as 2.5-inch SSDs from 12 V ATX supplies.
After installing the cables, how can I confirm the SATA drive is receiving power correctly?
The drive should spin up and appear in BIOS or the operating system without errors, showing the power connection is working.
What comes in the package and do I need any extra adapters?
The pack contains three 20 cm Molex-to-SATA power cables in a protection case; no additional adapters are required for standard SATA drives.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
NEON Drive IEEE 1394 Firewire cable 4-pin to 9-pin 300cm 10-ft
- IEEE 1394(Firewire)
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





