BONAEVER SATA 22 Pin 2.5 inch Female to USB 3.0 & Type-C Male SATA Cable
Connects a 2.5 inch SATA SSD or hard drive to USB 3.0 and Type-C ports with hot-swap and plug-and-play support
- Case styleProtection Case
- Connect 2.5 inch SATA drives via USB 3.0 or Type-C
- Up to 5 Gb/s transfer speed with USB 3.0 interface
- Hot-swap and plug-and-play support for easy drive changes
- Complies with Serial ATA Specification Revision 2.6
- Backward compatible with USB 1.0, 1.1, 2.0 and SATA 1.5 Gb/s drives
SATA 22-pin adapter for 2.5-inch drives
This cable connects a 2.5-inch SATA hard drive or SSD to a USB 3.0 or USB Type-C port on a MacBook or laptop. It supports drives that follow the Mass Storage Class standard and does not work with 3.5-inch hard drives. The adapter is compliant with Serial ATA specification revision 2.6 and includes a protective case.
Replaces internal drive bays or docking stations
Use this adapter when you need to access data from a laptop drive without installing it inside a chassis or using a separate power supply. The jump is worth it for quick data recovery, drive cloning or temporary external storage because the USB 3.0 interface offers up to 5 Gb/sec transfer rates and the cable is backward compatible with USB 2.0 and 1.1 ports as well as SATA 1.5 Gb/s drives.
Check drive size and port availability
Verify that your drive is a 2.5-inch SATA model because 3.5-inch drives are not supported. Ensure your computer has a free USB Type-A or USB Type-C port for the male connectors. The adapter supports hot-swapping and plug-and-play, so no driver installation is required, but the host system must be able to supply enough bus power for the connected drive.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $11.99
- Cheaper than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Size & build | |
|---|---|
| Case style | Protection Case |
Questions about this item
Does the 22-pin SATA connector fit a 2.5-inch SSD or hard drive?
Yes, the 22-pin female connector is designed for 2.5-inch SATA SSDs and hard drives. It does not support 3.5-inch drives.
How do I connect this adapter to my laptop and what step is often missed?
Plug the USB 3.0 or USB-C male end into the laptop, then attach the 22-pin SATA end to the drive. The drive must be seated firmly so all 22 pins make contact.
Will the USB 3.0 interface maintain its 5 Gb/s transfer rate over time?
The adapter complies with Serial ATA 2.6 and USB 3.0 specifications, so the 5 Gb/s maximum rate is sustained as long as the drive and host port also meet those standards.
More in SATA & eSATA Drive Cables
Similar items
STARTECH PYO2LP4SATA 12in LP4 to 2 SATA power splitter cable
- 1 ft (0.3 m)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Aoiutrn JMH-01 SATA Cable III 4 Pack 90 Degree Right Angle Straight 50cm 6Gbps 3.0
- Auxiliary
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





