BUCIER 2-Pack SFF-8643 to 4 SATA Cable 0.5 m
Two-pack of 0.5 m SFF-8643 to four SATA breakout cables for connecting a RAID controller to four drives
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack+Blue
- Overall length1.6
- Key featuresBraided
- Connect up to four drives per cable
- 5 m length keeps server chassis tidy
- Locking latches on both ends secure links
- 30 AWG conductors stay flexible in tight bends
- Two cables included for dual-controller setups
Two-pack 0.5 m SFF-8643 to SATA breakout
This BUCIER two-pack provides two internal SFF-8643 to 4 SATA breakout cables, each 0.5 m long. They connect a single Mini-SAS HD 12 Gbps HBA or RAID controller port to four SATA hard drives or SSDs. The cables use 30 AWG conductors with braided sleeving and feature locking latches on both ends for secure retention.
Suits RAID or HBA expansion, not backplane SFF-8643
These cables are designed for builders adding SATA drives to a Mini-SAS HD 8643 host port on a controller or motherboard. They will not work if the target backplane or enclosure presents an SFF-8643 connector, because the host-side plug is male SFF-8643 and the breakout end is four SATA females. Buyers needing SFF-8643 on both ends or a reverse breakout should look elsewhere.
12 Gbps SAS host to 6 Gbps SATA target
The host-side SFF-8643 interface supports SAS 12 Gbps signalling, while each of the four SATA connectors operates at up to 6 Gbps per drive. This asymmetry decides whether the cable matches your controller and drive speeds. Verify that your HBA or RAID card exposes an internal SFF-8643 port and that your drives are SATA before installing.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $26.99
- Pricier than about 85% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | HD MINISAS-004 |
| Product type | Mini-SAS Cables |
| Product color | Black+Blue |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What controller or motherboard port do I need to plug the SFF-8643 end into?
The cable requires a 12Gbps SAS HBA or RAID controller with an internal HD Mini-SAS SFF-8643 male port.
Will the 6Gbps per-drive limit bottleneck my older 3Gbps SATA drives?
Each of the four SATA 7-pin female connectors runs at up to 6Gbps, so 3Gbps drives will operate at their native speed without bottleneck.
How can I verify the link is running at 6Gbps after installation?
Check the controller BIOS or OS disk utility; each attached drive should report a negotiated SATA 6Gbps link speed.
More in SATA & eSATA Drive Cables
Similar items
eshinreal PCIe 4.0 SlimSAS 4i SFF-8654 to U.2 SFF-8639 Cable 70cm
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





