BUCIER 2Pack Mini-SAS to SATA Cable 0.5m SFF-8087 to 4x SATA 90°
A two-pack of 0.5 m Mini-SAS SFF-8087 to four SATA 90-degree breakout cables for connecting a RAID controller to four drives at 6 Gb/s per drive
- Rated speed6 GB/s
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack/Blue
- Overall length1.6
- Key featuresSFF-8087 to 4x SATA 90 Degree
- 2-pack expands storage with four SATA drives per cable
- 6 Gb/s per drive supports fast SSD and HDD throughput
- 90° right-angle SATA plugs ease routing in tight cases
- Locking latch on Mini-SAS end secures the controller link
- 30 AWG thin conductors keep airflow clear inside the chassis
SFF-8087 to 4x SATA breakout
This two-pack provides a Mini-SAS SFF-8087 male host connector that splits into four right-angle SATA 7-pin female targets. Each cable runs 0.5 metres and supports 6 Gb/s per drive. The 30 AWG conductors keep the assembly thin and flexible for tight chassis routing. Locking latches on both ends secure the link against vibration.
Host controller to drive backplane
Connect the 36-pin SFF-8087 plug to a SAS HBA, RAID card or motherboard port; the four 90-degree SATA tails plug directly into HDDs, SSDs or a backplane. The forward breakout layout means the host end stays at the controller while the drive ends fan out, simplifying cable management in dense storage builds. No additional adapters or interposers are required.
Replaces loose fan-out cables
Builders currently running individual SATA leads from a controller can consolidate to a single mini-SAS link, reducing clutter and improving airflow. The jump is worthwhile when a controller exposes SFF-8087 ports and four drives share the same enclosure zone. Not suited for backplanes that expect an SFF-8087 target connector or for configurations needing straight SATA plugs.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $22.99
- Pricier than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | DC-0036 |
| Product type | Mini-SAS Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 GB/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
How much airflow space does the 90-degree SATA connector need inside a crowded drive cage?
The right-angle design keeps the cable flush against the drive, so only the connector height itself is required; no extra bend radius is needed.
Does the 30 AWG conductor handle continuous 6 Gbps traffic without overheating?
The thin 30 AWG copper wires are rated for the 6 Gbps per drive signal and remain cool under normal sustained transfer loads.
What controller connector must already be present for the SFF-8087 plug to mate?
A SAS HBA, RAID card or motherboard with an internal SFF-8087 36-pin male port is required on the host side.
More in SATA & eSATA Drive Cables
Similar items
Nippon Labs SATA-1RR-10P SATA cable 1 m right angle 10 pack
- 3.28 ft (1m)
- SATA II
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
JSAUX JSUKNZUC2SAGY1P SATA to USB C Cable 5Gbps Grey
- 5 Gbit/s
- Male-to-Male
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
HETAI Digital Technology Co.,Ltd USB 3.0 to SATA Cable 2.5 inch 200mm Black
- Micro USB to USB A





