BUCIER 4 Pin IDE Y Splitter Cable 23cm 2 pcs
Splits one 4-pin IDE power connector into two for drives and fans, using 18 AWG tinned copper wire and 23 cm PVC-insulated leads
- Connector detailsIde
- Connector genderMale-to-Female
- Conductor typePVC
- Product typeSATA
- Product colorBlack
- Key features????
- Splits one 4-pin IDE connector into two
- 23 cm length adds reach inside the case
- 18 AWG tinned copper for stable current
- Plug-and-play extension for drives and fans
- Pack includes two identical splitter cables
Power-splitter for legacy drives
The BUCIER 4 Pin IDE Y Splitter cable turns a single Molex connector into two female ports so older hard disks, optical drives or case fans can share one power lead. Each pack contains two 23 cm cables built with 18 AWG tinned copper wire and PVC insulation for stable current delivery. The plug-and-play design needs no tools or configuration, making it a quick fix for systems that have run out of four-pin power sockets. Ideal for maintaining or expanding legacy desktop builds.
Builders with free Molex headers
Suits anyone adding a second IDE drive, a DVD-ROM or extra cooling fans to a power supply that still offers Molex outputs but lacks enough connectors. Not intended for SATA-only power supplies or for devices that require keyed SATA power plugs, so builders without a spare four-pin header should look at alternative adapter types. The short 23 cm reach also limits use in full-tower cases where drives sit far from the PSU. Choose a longer harness if cable routing distance is a concern.
Steady output under continuous load
The 18 AWG conductors keep voltage drop low when both branches draw power simultaneously, so a hard disk and a fan can spin up together without tripping the PSU protection. PVC jacketing resists heat from nearby components and remains flexible during repeated drive swaps. Because the splitter simply passes through the rail current, sustained performance matches the host power supply’s own rating rather than adding any bottleneck. Reliable for always-on servers or workstations running legacy storage arrays.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 1,954 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | XMSJSIY |
| Model name | LE-0026 |
| Product type | SATA |
| Product color | Black |
| Ports & slots | |
| Connector details | Ide |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | PVC |
Questions about this item
What power connector must my power supply provide for the 4-pin IDE male plug on this splitter?
Your power supply needs a standard 4-pin Molex output to accept the male connector on the 23 cm cable.
Can I keep using an older IDE hard drive and optical drive together with this Y splitter?
Yes, the dual female connectors let you power both a legacy hard disk and a CDROM or DVD-ROM from one Molex lead.
How can I confirm the 18 AWG tinned copper conductors are delivering stable current after installation?
Check that both connected drives spin up reliably and the system boots without power-related errors.
More in SATA & eSATA Drive Cables
Similar items
DKARDU NR-US-050 4-pack 22-pin SATA combo extension cable 50cm
- Optical
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
AYECEHI SATA III 6.0 Gbps cable 90° locking latch blue 12 inch 6 pack
- Sata
- Male-to-Male
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





