BUCIER Dual 15-pin SATA to 8-pin PCIe Power Cable 7.4in 2-pack
Dual 15-pin SATA male to 8-pin PCIe female Y-splitter cable set powers a graphics card from two SATA connectors, 7.4 in each, 2-pack
- Rated speed6 Gbit/s
- Connector detailsSata 8-pin Pci--e
- Connector genderMale-to-Female
- Conductor typePVC Copper
- Product typeCoaxial
- Product colorBlack
- Dual SATA power feeds high-end GPU from two 12 V rails
- 8-pin (6+2) male plug fits both 8-pin and 6-pin graphics cards
- 15-pin SATA male connectors repurpose unused PSU ports for video power
- 18 AWG pure-copper conductors with braided PVC jacket for flexible routing
- 4 in length keeps cable management tidy inside compact cases
Dual SATA to PCIe Power Adapter
This BUCIER cable converts two 15-pin SATA power connectors into a single 8-pin (6+2) PCIe connector. It targets builders who need to power a graphics card when the power supply lacks native PCIe cables. The 7.4in length suits tight routing between drives and the GPU.
Installation Notes and Common Issues
The 18AWG pure copper conductors are thick yet flexible for easy bending inside a case. Users must align the 6+2 pin plug correctly and hold the device steady while seating it to avoid bent pins or shorts. The braided sleeve adds durability but can snag on sharp case edges if not routed carefully.
SATA Power Rail Limitations
Each SATA connector draws from a 12 V rail rated for limited current, so the adapter suits mid-range cards rather than high-wattage models. The dual-SATA design spreads load across two rails for better stability. It cannot replace a dedicated PCIe cable on power supplies that already provide one.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | GELRHONR |
| Model name | GELRHONR-SATA-PCIE-CABLE-DUAL-15PIN-8PIN |
| Product type | Coaxial |
| Product color | Black |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector details | Sata 8-pin Pci--e |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | PVC Copper |
Questions about this item
How can I confirm the 18AWG cable is delivering stable power to my GPU after connecting the dual 15-pin SATA plugs?
The system should boot without crashes and the graphics card fans should spin normally, showing the adapter is drawing from two 12 volt rails as intended.
What comes in the 2-pack and do I need any extra connectors for a 6-pin video card?
The box contains two 7.4in dual 15-pin SATA male to 8-pin PCIe female adapter cables; the 8-pin end splits to 6+2 so no extra parts are required for a 6-pin GPU.
Which version should I choose if my power supply only has 15-pin SATA ports free?
This dual 15-pin SATA to 8-pin (6+2) PCIe cable is the correct version to convert two SATA power connectors into one GPU power plug.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





