BUCIER LH-140 IDE to 5×SATA Power Splitter Cable 78cm
Converts one 4-pin IDE connector into five SATA power ports using 78 cm of 18 AWG copper cable
- Rated speed0 kilobytes per second
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeSATA
- Product colorBlack
- Overall length78
- Converts one 4-pin IDE connector into five SATA power ports
- 18 AWG copper conductors deliver reliable high-current supply
- 78 cm total length with 24 cm lead and four 13.8 cm branches
- Flat parallel ribbon keeps wiring neat and airflow clear
- Moulded one-piece plugs prevent degumming and ensure firm contact
IDE-to-SATA power splitter
The BUCIER LH-140 cable converts a single 4-pin IDE male connector into five 15-pin SATA female connectors. It is built for PC builders who need to power multiple SATA hard drives or optical drives from a legacy Molex-style supply. The 78 cm total length uses 18 AWG copper conductors to handle the combined current draw of up to five drives.
Sustained power delivery
The parallel flat design keeps the wires neat inside the case and reduces resistance across all five branches. Each SATA head receives power from the same 4-pin source, so the cable is suited for steady loads such as storage arrays or optical drives rather than short bursts. Copper construction and moulded connectors aim to maintain consistent contact during continuous operation.
SATA power interface limits
The splitter only works with devices that accept standard 15-pin SATA power; connecting it to incompatible ports can damage components. It does not convert data signals, so each drive still requires its own SATA data cable to the motherboard. The 24 cm lead to the first connector and 13.8 cm spacing between subsequent heads set the practical reach inside the chassis.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | GELRHONR |
| Model name | LH-140 |
| Product type | SATA |
| Product color | Black |
| Performance | |
| Rated speed | 0 kilobytes per second |
| Ports & slots | |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Does the LH-140 splitter cable run hot or draw extra power when all five SATA drives are spinning continuously?
The cable uses 18 AWG copper conductors rated for high current, so it delivers power without adding heat of its own; the drives determine the total draw.
My power supply only has 4-pin Molex connectors — will the LH-140 plug straight in?
Yes, the single 4-pin IDE male plug on the LH-140 mates directly with any standard Molex connector from the PSU.
Can I keep using my older IDE hard drive while also connecting newer SATA drives through this splitter?
The LH-140 only provides 15-pin SATA power outputs, so it cannot power an IDE drive; you would need a separate Molex connection for that drive.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





