BUCIER Mini SAS SFF-8087 to 4 SATA 0.5M 1.6FT 6Gbps 30AWG
Connects a Mini SAS SFF-8087 controller to four SATA drives at 6Gbps using 30AWG cable
- Rated speed6 Gbit/s
- Conductor typeCopper
- Product typeMINI SAS CABLE
- Product colorBlack+Blue
- Overall length1.6
- Key featuresMINI SAS SFF-8087 to SATA Cable
- Connect up to four SATA drives via one Mini SAS SFF-8087 port
- 6 Gbps per lane supports fast data throughput
- 30 AWG thin cable bends easily in tight chassis
- 5 m length keeps internal routing short and tidy
- Locking latches on both ends secure connections against vibration
SFF-8087 to 4 SATA breakout
This 0.5 metre cable links an internal Mini SAS 36-pin SFF-8087 male port on a controller or motherboard to four SATA 7-pin female connectors for drives. It is built for professionals expanding storage with a SAS HBA or RAID card. The forward breakout design carries data from the host side to each target drive at up to 6 Gbps per channel. Buyers who need a cable for a backplane SFF-8087 port cannot use this product.
Locking latches and labelled leads
Both ends feature locking latches that hold the connectors firmly in place during operation. The four SATA tails are individually labelled to simplify cable management when routing to multiple hard drives or SSDs. Thin 30 AWG conductors keep the assembly flexible for tight chassis routing. No additional software, adapters or power leads are included in the package.
Straightforward internal install
Connect the SFF-8087 male end to the controller and press each SATA female end onto a drive or backplane until the latch clicks. The short 1.6 foot length limits slack but reduces signal loss. A common error is plugging the SFF-8087 side into a backplane instead of the host controller, which prevents the link from working. Verify the host port is SFF-8087 before fitting.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | MINISAS-001 |
| Product type | MINI SAS CABLE |
| Product color | Black+Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Will the 30 AWG conductors need replacement if I route the cable through tight bends?
The 30 AWG copper conductors are thin and flexible for routing, but repeated sharp bends can fatigue any cable; inspect the SFF-8087 latch and SATA connectors periodically for loose pins.
What limits sustained throughput when four drives are active on this breakout?
Each SATA leg is rated at 6 Gbps, so the aggregate ceiling is the SFF-8087 host link; the cable itself does not impose a lower bottleneck.
Does the cable run warm or draw extra power during all-day RAID rebuilds?
Passive copper construction adds no active heat or power draw; only the controller and drives generate warmth, so cable temperature stays near ambient.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables





