BUCIER Mini SAS SFF-8087 to 4 SATA 90° Breakout Cable 3.3FT
Connects a SAS controller to four SATA drives using a 3.3 ft SFF-8087 breakout cable with 90-degree right-angle connectors for tight spaces
- Rated speed6 Gbit/s
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack+blue
- Overall length3.3
- Key featuresSff-8087 to sata right angle 90 degree
- Connects one controller to four drives
- Mini SAS SFF-8087 host with locking latch
- Four right-angle SATA connectors ease tight builds
- 30 AWG copper conductors support 6 Gbps per drive
- 3 ft length fits standard chassis routing
Internal SAS-to-SATA breakout cable
This BUCIER cable converts one internal Mini SAS SFF-8087 36-pin male connector into four SATA 7-pin female right-angle connectors. The 3.3 ft length uses 30 AWG copper conductors rated for 6 Gb/s per drive and both ends feature locking latches. It is designed to link a SAS RAID controller or HBA directly to up to four SATA hard drives or SSDs.
Builders connecting a controller to discrete drives
Suits anyone wiring a SAS HBA or RAID card to individual SATA drives inside a chassis where the 90-degree SATA plugs ease routing. Not for installations that require straight SATA connectors, longer reach than 3.3 ft, or a Mini SAS SFF-8087 female port on the host side. Also unsuitable if the target device expects a Mini SAS receptacle rather than four separate SATA ports.
Host connector is SFF-8087 36-pin male
The cable only works when the controller or motherboard presents an internal SFF-8087 36-pin male port; plugging the Mini SAS end into a backplane or any other connector type will not function. Verify that single port type before purchase.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $13.99
- Typical for this category: the median of 1,954 items is $13.99.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | Mini SAS-0015 |
| Product type | Mini-SAS Cables |
| Product color | Black+blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Size & build | |
| Conductor type | Copper |
Questions about this item
What comes in the box and is anything else needed to connect four drives?
The package includes one 3.3FT Mini SAS SFF-8087 male to four SATA 7-pin female right-angle cables. The SFF-8087 end plugs into a SAS HBA or RAID controller; each SATA end connects directly to a drive or backplane. No extra adapters are required for the four SATA targets.
The cable is described as 6 Gbps per drive; does the 12 Gbps host link limit drive choice?
The SFF-8087 host connector supports 12 Gbps aggregate bandwidth, while each of the four SATA lanes runs at 6 Gbps. Any 6 Gbps SATA SSD or HDD will operate at its rated speed; the 12 Gbps host capability simply provides headroom for four simultaneous 6 Gbps streams.
What does the 90-degree SATA connector orientation mean inside a typical case?
Each SATA plug angles 90 degrees forward from the cable, allowing the connector to sit flat against a drive or backplane. This reduces strain in tight drive cages and keeps the 30 AWG cable routed cleanly alongside the chassis without sharp bends.
More in SATA & eSATA Drive Cables
Similar items
DKARDU NR-US-050 4-pack 22-pin SATA combo extension cable 50cm
- Optical
- SATA
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
AYECEHI SATA III 6.0 Gbps cable 90° locking latch blue 12 inch 6 pack
- Sata
- Male-to-Male
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA





