BUCIER Mini-SAS SFF-8087 to 4×SFF-8482 breakout cable 3.3 ft
Connects a SFF-8087 host port to four SFF-8482 drives with integrated SATA power over a 3.3 ft copper cable
- Rated speed6 Gbit/s
- Connector genderMale-to-Female
- Conductor typeCopper
- Product typeMini-SAS Cables
- Product colorBlack/Blue
- Overall length3.3
- Connects one controller to four drives
- SFF-8087 36-pin male to four SFF-8482 targets
- Each target includes SATA 15-pin power adapter
- 6 Gbps data rate over 30 AWG copper
- 3 ft length for internal chassis routing
Mini-SAS breakout cable
The BUCIER Mini-SAS SFF-8087 to 4×SFF-8482 breakout cable connects a single 36-pin SFF-8087 host port on a RAID controller or motherboard to four SFF-8482 targets. Each target includes a SATA 7-pin data connector and a 15-pin power adapter. The cable is 3.3 ft long and rated for 6 gigabits per second.
Integrated power adapters
Every SFF-8482 branch carries its own SATA 15-pin power connector, so drives receive both data and power from the same assembly. This removes the need for separate power cables from the PSU to each drive. The 30 AWG conductors keep the bundle thin and flexible for routing inside tight chassis.
For direct-attached SAS/SATA drives
This breakout suits builders attaching up to four SAS or SATA hard drives or SSDs directly to an internal SFF-8087 host port. It will not work with SAS drives connected through a backplane using the SFF-8087 connector, nor with configurations that require a middle SAS pin on the target side.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $21.99
- Pricier than about 78% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | Mini SAS-009 |
| Product type | Mini-SAS Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 Gbit/s |
| Ports & slots | |
| Connector gender | Male-to-Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Will the SFF-8482 connectors or the 30 AWG cable need replacement after heavy use?
The cable uses 30 AWG copper conductors and SFF-8482 connectors with integrated SATA 15-pin power adapters; no user-serviceable parts are specified, so plan to replace the entire assembly if a connector fails.
What throughput limit appears first when the link runs continuously at 6 Gbps?
Each SFF-8482 leg is rated for 6 Gbps, so the per-drive SAS 6 Gbps ceiling is the first bottleneck under sustained transfer.
How much heat or noise does the breakout cable add when all four drives run all day?
The passive copper cable adds no active cooling or noise; only the drives and controller generate heat, while the 30 AWG wires carry the 6 Gbps signals without extra power draw.
More in SATA & eSATA Drive Cables
Similar items
SXDOOL SATA cable for ThinkPad T470 T480 A485 475 0UR495
- Case Fan Accessory
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Pagaloce SATA to USB 3.0 & Type-C Adapter Cable 1m Grey
- Sata, Usb Type C
- Male-to-Male





