BUCIER SATA 7Pin Right-Angle Adapter 90° Black 2-pack
Right-angle SATA 7-pin adapter redirects cables 90 degrees in tight chassis, supports 600 MB/s data rates, and includes a locking latch for secure connections in a two-pack
- Connector detailsSata 7pin Male to Female
- Conductor typeCopper
- Product colorBlack - 2 Up
- Solves tight clearances with a 90° right-angle design
- Supports 600 MB/s data rates via SATA III
- Locking latch prevents accidental disconnection
- Copper conductors ensure reliable signal integrity
- Two adapters included for multiple drives
90° SATA adapter for tight builds
This BUCIER right-angle adapter changes a vertical SATA 7-pin port to a horizontal one. It fits desktops where chassis height or drive placement blocks a straight cable. The 2-pack lets you reroute two connections at once. Builders working in compact cases or behind stacked drives will find the 90-degree turn essential.
Replaces straight SATA cables that foul on lids
Swap a standard cable for this adapter when a side panel, graphics card or drive cage leaves no headroom. The jump is worth it whenever a straight plug would bend sharply or press against metal. If your current cable already routes cleanly without stress, the adapter adds no benefit.
Limited to SATA III 6 Gbit/s electrical performance
The copper conductors and locking latch meet the SATA III spec for 600 MB/s throughput. No signal conditioning or active circuitry is present, so cable length and host-controller quality still set the real-world ceiling. The adapter cannot compensate for a marginal host port or a cable run that exceeds the standard's passive reach.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | GELRHONR |
| Product color | Black - 2 Up |
| Ports & slots | |
| Connector details | Sata 7pin Male to Female |
| Size & build | |
| Conductor type | Copper |
Questions about this item
Will the 90° right-angle body clear a low-profile case roof?
The 90° design lets the cable run horizontally from the motherboard header, keeping the connector flush against the drive so it fits under tight chassis ceilings.
Does the locking latch click onto a standard SATA 7-pin header without extra force?
Yes, the latch engages the standard SATA 7-pin male header on the board or drive; press straight in until you feel the click — angling the plug is the common mistake.
If the latch tab snaps off after repeated swaps, can I replace just the adapter?
The pack includes two identical adapters, so a spare is already on hand if a latch breaks during drive changes.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
Cable Matters 104008-24x3 3-Pack 90° SATA Cable 24in Red
- Sata
- SATA





