BUCIER SATA Cable III 3-pack 6Gbps 18in White
Three SATA 3.0 cables with locking latches connect drives at up to 6 Gbps, each 18 inches long in white
- Product colorWhite
- Three cables in one pack supply spares for multiple drives or RAID builds
- Locking latch on each connector prevents accidental disconnection during operation
- SATA 3.0 interface supports up to 6 Gbps transfer rates
- Backwards compatible with SATA I and SATA II devices
- 18 inch length suits standard desktop chassis routing
Three-cable pack for SATA storage
This three-pack supplies 18-inch SATA cables with straight connectors and locking latches. Each cable supports the 6 Gbps SATA 3.0 interface and is coloured white for easy identification. The bundle suits builders adding multiple hard drives, SSDs or optical drives in one session.
Replaces worn or missing SATA leads
Use these cables when existing leads are damaged, too short or lack a locking latch. The 6 Gbps rating doubles the throughput of the older 3 Gbps revision while remaining backward compatible with earlier SATA devices. The jump is worth it whenever you need reliable full-speed links for several drives at once.
Check port orientation and device spacing
Verify that your motherboard and drive ports accept straight connectors without interference from nearby components. Confirm the 18-inch length reaches between your intended drive bays and the motherboard SATA headers. Ensure your system uses standard SATA power and data ports rather than proprietary drive trays.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | White |
Questions about this item
What drive spacing does the 18-inch length suit?
The 18-inch cable reaches between drives and motherboard headers in standard ATX cases without excess slack.
How does the locking latch engage on the SATA 3.0 connector?
Press the connector straight in until the metal latch clicks over the drive port tab; angled insertion leaves the latch unseated.
When should a cable from the 3-pack be replaced?
Replace a cable if the latch no longer holds, the plug wiggles in the port, or data errors appear during large transfers.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





