BUCIER SATA Cable III 3 Pack 90 Degree 6Gbps 50cm White
Three SATA 3.0 cables with 90-degree locking connectors, 50 cm length, 6 Gbps rated for HDDs and SSDs
- Product colorWhite
- Transfer 1 GB in about 5 seconds with 6 Gbps SATA 3.0 speed
- Three cables in one pack give spares for RAID or multiple drives
- 90-degree connectors fit tight spaces behind drives and motherboards
- Locking latches on both ends keep connections secure during vibration
- White 50 cm length suits clean internal cable routing
Three-pack SATA III cables for storage upgrades
This three-pack supplies three SATA III cables with a 90-degree connector on each end, intended for builders adding or replacing hard drives, solid-state drives or optical drives. The white colour helps identify cables inside a case. Each cable carries a locking latch to resist vibration. The pack suits anyone expanding internal storage on a desktop system.
Replaces older SATA I
The cables conform to SATA revision 3.0 and support up to 6 Gbps transfer rates, doubling the ceiling of the previous revision while remaining backwards compatible with SATA I and SATA II devices. The upgrade is worthwhile when the host controller and the drive both support the higher signalling rate; otherwise the link will simply negotiate the lower speed.
Verify connector orientation
Each end uses a straight 90-degree plug, so confirm that the motherboard and drive ports have enough clearance for the right-angle profile. The cables measure 50 cm (18 in), which suits typical mid-tower layouts but may fall short in full-tower or server chassis where routing distances are longer. Ensure the locking latches can engage fully on both devices.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | White |
Questions about this item
What length and connector angle do these SATA cables have?
Each cable is 50 cm (18 inch) long and uses a straight connector on one end with a 90-degree right-angle connector on the other.
How do I secure the locking latch on the SATA 3.0 connectors?
Align the connector with the port, push straight in until the metal latch clicks, and pull gently to confirm it is locked; do not force the cable sideways.
When should I replace these SATA cables?
Replace a cable if the latch no longer clicks, the connector wiggles in the port, or you see intermittent drive detection and data errors.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors
CableCreation Mini SAS SFF-8087 to Right Angle SFF-8087 Cable 2.5FT
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
KEHIPI E55 SATA to USB 3.0 Adapter Cable 9 Inches Grey
- Usb a 3.0
- Male-to-Male





