BUCIER SATA III 90° 3-pack 50cm Green
Three green SATA III cables with 90° locking connectors, 50 cm each, rated for 6 Gbps data transfer
- Product colorGreen
- Up to 6 Gbps transfer speed with SATA 3.0 support
- 90° right-angle connectors fit tight build spaces
- Locking latch on each end prevents accidental disconnects
- Three cables in one pack supply spares or RAID needs
- 50 cm length reaches drives across standard chassis
Three-cable kit for SATA drives
The pack contains three SATA III cables, each 50 cm long, with a 90-degree right-angle connector on one end. They are intended for builders adding or replacing internal hard drives, SSDs or optical drives. The green colour helps identify cables inside a busy chassis.
Sustained 6 Gbps link with shielding
Each cable conforms to the SATA 3.0 specification, supporting up to 6 Gbps data rates and remaining backwards compatible with earlier revisions. A tinned copper core and aluminium foil shield protect the signal from external interference during continuous transfers. Actual throughput will depend on the connected drive and controller.
Locking latches and right-angle routing
Both ends feature a straight connector equipped with a locking latch that resists disconnection from vibration or case movement. The 90-degree profile lets the cable run close to the motherboard or drive, easing routing in tight drive bays. The three-cable bundle provides spares for RAID arrays or multiple upgrades.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Product color | Green |
Questions about this item
Does the 90-degree SATA III cable run hot or draw extra power during all-day transfers?
The cable is passive with a tinned copper core and aluminium foil shield, so it adds no heat or power draw beyond the drive itself.
What must my motherboard already have for these three 50 cm cables to work?
A free SATA III 6 Gbps port with a standard 7-pin data connector for each drive you want to attach.
Will the 6 Gbps SATA III cables slow down an older SATA II hard drive I keep?
They are backwards compatible with SATA I and II, so the older drive will simply run at its own rated speed.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





