BUCIER SATA-III Cable 0.5M 4-Pack Thin 6Gbps Black/Blue
Four thin SATA III cables at 0.5 m each support 6 Gbps data transfer for drives and RAID arrays
- Rated speed6 GB/s
- Conductor typeNylon
- Product typeSATA Cables
- Product colorBlack/Blue
- Overall length1.6
- Key features4 PCS/SET Straight SATA to SATA Cable For server
- 4-pack simplifies multi-drive builds
- 6 Gbps SATA III speed handles SSD and HDD traffic
- 5 m length keeps server chassis tidy
- Nylon braid bundles four cables for clean routing
- Locking SATA 7-pin connectors secure every connection
Four-Pack SATA-III Cables for Dense Builds
This set includes four straight 7-pin SATA data cables measuring 0.5 metres each. They connect motherboards or host controllers to internal HDDs, SSDs, optical drives or RAID controllers. The nylon-braided sleeve bundles the four leads together for tidy routing in tight server or embedded chassis.
Sustained 6 Gbps Throughput in RAID Arrays
Each cable meets the SATA 3.0 specification and supports up to 6 Gbps transfer rates, limited only by the attached drives or controller. The 30 AWG conductors and 12 G-rated SAS-grade wiring maintain signal integrity across all four channels during continuous multi-drive workloads such as parity rebuilds or plotting operations.
Replaces Loose Single Cables in Multi-Drive Bays
The labelled P1–P4 ends simplify port mapping on backplanes or multi-bay enclosures where cable identification matters. Locking latches prevent accidental disconnection under vibration. Not suited for builders who need longer runs beyond 1.6 feet or who require combined data and power in a single connector.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 63% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | SATA-005 |
| Product type | SATA Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 GB/s |
| Size & build | |
| Conductor type | Nylon |
Questions about this item
Does the 0.5 m SATA cable generate noticeable heat or noise when running continuously in a server?
The cable is a passive data link with no active components, so it produces no heat or audible noise during continuous operation.
What must already be installed in the system for these SATA 7-pin cables to function?
A motherboard or host controller with SATA ports and a separate power connection for each drive are required.
Will the 6 Gbps cables work reliably with older SATA I and SATA II hard drives kept in the same array?
Yes, they are backwards compatible with SATA I and SATA II drives, with speed limited by the attached equipment.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATRD30CM 30cm SATA cable latching 6Gbps
- 11.81 in (30 cm)
- SATA III
Nippon Labs SATA-1MR 1m right-angle SATA cable
- 3.28 ft (1m)
- SATA
Transway's Marketplace DT-5025D USB 2.0 to SATA 2.5" cable .5 ft
- Usb2.0 to sata and…
- Clear Blue
STARTECH SATA6RA1 6" SATA right-angle cable 26 AWG 152.4 mm
- 6 in (15.2 cm)
- Cable Connectors





